Glltzhome, LLC glitz home' pi— ASSEMBLY INSTRUCTION Garden Cart with Removable Folding Sides (Easy Assembly) 1. Remove parts from carton. Place carton on flat surface and complete assembly on the carton to keep from scratching or damaging the finish of parts. To assemble truck use socket wrench, an adjustable crescent wrench or the wrench provided in the hardware package. Parts List . Bed (1) . Side Panels (2) . Front Panel (1) . Back Panel (1) . Wheels (4) Front Axle Support {1} . Rear Axle Support (1) .
. IMPORTANT SAFETY INSTRUCTIONS . MAX LOAD: 550 Ibs. NEVER OVERLOAD THIS CART DO NOT inflate tires more than 35 psi . DO NOT operate if any part is damaged or broken . Lower fence rails when loading large items onto cart Distribute load evenly in cart bed . DO NOT use on steep inclines where tipping may occur . Do not allow children to use this cart. It is not a toy It is recommended that you do not modify or use this cart for any application other than that for which it was designed j. MAINTENANCE k.
4. Attach the Assembled U Yoke & Front Axle Support to front of bed using M12 Washers (E) and M12 Nylon Nuts (C). Tighten bolt fully and then loosen one half turn for easier steering movement. BRR mY Se TRS attach the wheels, put wheel on to axle and secure ; with M12 Washer (E) and M12 Nylon Nut (C) bd ol LOTS OCR] foist] Complete step for all 4 wheels. Turn truck over onto wheels. 6.
7. One at a time, attach the Side Panels by aligning the hinges, sliding Fence Assembly Pins (G). 8. To lock the Sides in place, hold Side Panel in the up position. Rotate Side Panel Lock Lever from the up position to the down position and in doing so capture the Side Panel hook. To fold truck sides down rotate the Side Panel Lock Levers into the up position and fold panels down.
