Use and Care Manual

Architectural Coatings Interior Ceiling Paint Flat
GENERAL DESCRIPTION
PRODUCT DATA
GPL-0000
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
Ceiling Paint is a spatter-resistant low-VOC vinyl-acrylic latex
designed to meet the maintenance needs of residential
repainters, remodelers, commercial contractors, facility and
property managers. The great hide and coverage of this white
ceiling paint helps mask minor surface imperfections and dries
quickly to a smooth and clean finish. For interior use on new and
previously painted wood, drywall and plaster.
PRODUCT TYPE: Vinyl Acrylic Resin
FINISH: Flat
SHEEN: Gloss: 2.5 - 6.5 units @ 85º
VOLUME SOLIDS: 15% +/- 1%
WEIGHT SOLIDS: 27% +/- 1%
VOC: <50 g/L (0.4 lbs./gal.)
WEIGHT/GALLON: 9.71 lbs. (1.16 kg/L)
PRACTICAL COVERAGE: Apply at 200 - 300 sq. ft./gal. (5- 7 sq. m/L).
Actual coverage may vary depending on surface texture, porosity, and
application method.
Wet Film Thickness: 5.3 - 8.0 mils
Wet Microns: 134 - 203
Dry Film Thickness: 0.8 - 1.2 mils
Dry Microns: 20 - 30
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity
To Touch: 30 - 60 minutes
To Recoat: 2 - 4 hours
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement.
CLEANUP: Clean hands and tools immediately with warm, soapy
water. Clean spills right away with a damp cloth.
WASHING INSTRUCTIONS: After 30 days or when paint has fully
cured, areas may be washed using a non-abrasive, mild detergent
solution and cellulose sponge.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
TINTING AND BASE INFORMATION
GPL-0000 White
Tint the appropriate base with universal colorants.
APPLICATION INFORMATION
Mix thoroughly before use. Apply at package consistency. Apply
with a quality 1/4” - 3/8” nap roller or nylon polyester brush. An
extension pole is recommended for making longer strokes;
making it easier to maintain a wet-edge. To reduce lap marks and
ensure that you do not miss any areas, try to keep the light source
at your back and start by painting away from the window. If there
is more than one window, choose the largest window. USE WITH
ADEQUATE VENTILATION. KEEP OUT OF REACH OF
CHILDREN. Read all label and Material Safety Data Sheet
(MSDS) information prior to use. MSDS are available through our
website or by calling 1-800-454-3336.
Application Equipment: Apply with a high quality roller or brush.
Brush: Polyester/Nylon Brush
Roller: 1/4”- 3/8” nap roller cover
Thinning: Thinning is not required
Permissible temperatures during application:
Material: 50 to 90ºF 10 to 32ºC
Ambient: 50 to 90ºF 10 to 32ºC
Substrate: 50 to 90ºF 10 to 32ºC
Drywall
Plaster
Wood
A2.43
CONFORMANCE STANDARDS
VOC compliant in all regulated areas
Can help earn LEED
®
2009 credits
Features Benefits
Less than 50 g/L VOC Meets the most stringent VOC regulations nationwide
Low odor Ideal for painting in occupied spaces
Good coverage Hides minor surface imperfections
Uniform flat finish Reduces glares and dries evenly
Applies easily User friendly application
Spatter resistant Results in less cleanup
Can help earn LEED 2009 credits Contributes to sustainable design
Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page. DSF1-0690
CEILING PAINT