Manual

Glensound Expedition Manual E&OE Page 16 of 35
28. SMA Connector For Secondary Antenna
The Expedition requires 2 antennas for diversity purposes (provides better network
connections than just 1 antenna). The 2 antennas are called primary & secondary
but both are equally required for trouble free working.
29. Line Out Gain Control
A rotary gain (level) control is provided to allow the user to adjust the output level of
the analogue Line Out circuit to match equipment that it is connected to. The gain
control provides a gain range of -21 to +10dB. When the gain control is moved a
small box pops up on the display showing the gain/ loss level in dBs currently being
applied to the output.
30. Line Out XLR
This balanced analogue output provides an output from the Expedition to connect to
other audio equipment such as mixers, recorders, headphone amps etc. The audio
that is present on the output can be altered in the configuration menu.
31. USB Update
This USB connector can be used for connecting to a PC and updating the
Expeditions firmware. Only use/ connect to a PC if/ when advised to by Glensound
technical support.
28 29 30
31
ANTENNA
SECONDARY
LINE OUT
GAIN
SYSTEM UPDATE
g
CEW
www.glensound.co.uk
Designed and manufactured in UK
Serial No: 001
EXPEDITION