MSDS

Scentco, LLC – 93 Genesis Pkwy – Thomasville, GA 31792: Phone 877-723-6826 Fax 229-228-6137

Page 1 of 3

MSDS Clean Linen Filter Spray

Date Issued 5/13/2013

GENERAL INFORMATION

Common Name: Clean Linen Filter Spray

Chemical Name:

Synonyms:

Formula: The specific chemical identities of the ingredients in this mixture are

considered by us to be trade secrets and are withheld in accordance

with the provisions of 1910.1200 of the code of federal regulations.

Chemical Family:

CAS#:

FEMA#:

Code No: UAB11428/00 – Fragrance Formulation

Health Rating: (1) Slightly Hazardous

Fire Rating: (1) Above 200°F

Reactivity Rating: (0) Stable

Specific Hazard Rating:

Extinguishing Media: Water Fog, Carbon Dioxide, Foam, Dry Chemical

PHYSICAL PROPERTIES

Physical State: Liquid

Solubility in Water Yes

(G/100ML):

Color: Colorless to pale yellow

Odor: Fresh Clean

Flash Point (°F): >200

Specific Gravity (@22°C): 1.0360

Boiling Point (°C): N/A

Melting Point (°C): N/A

Vapor Pressure: not known

Vapor Density (air= 1): not known

% Volatile: <50

Evaporation rate: not known

PAGE 1
Page 1 of 3 MSDS Clean Linen Filter Spray Date Issued 5/13/2013 GENERAL INFORMATION Common Name: Chemical Name: Synonyms: Formula: Chemical Family: CAS#: FEMA#: Code No: Health Rating: Fire Rating: Reactivity Rating: Specific Hazard Rating: Extinguishing Media: PHYSICAL PROPERTIES Physical State: Solubility in Water (G/100ML): Color: Odor: Flash Point (°F): Specific Gravity (@22°C): Boiling Point (°C): Melting Point (°C): Vapor Pressure: Vapor Density (air= 1): % Volatile: Evaporation rate: Clean Linen F
PAGE 2
FIRE AND EXPLOSION HAZARDS Flammable Limits (G/CU FT): not known Extinguishing Media: Water fog, Carbon Dioxide, Foam, Dry Chemical Special Fire fighting Self contained breathing apparatus and protective clothing should be Procedures: worn. Unusual fire and explosion closed containers may build up pressure at elevated temperature. Cool with spray. Hazards: Materials/Conditions to avoid excessive heat, open flame, sources of ignition.
PAGE 3
PRECAUTIONS FOR SAFE HANDLING Spills: Eliminate all ignition sources. Ventilate area. Avoid inhalation of Product or use approved respiratory devices. Cover with an inert Absorbent and remove to an approved disposal container. Report Spill to appropriate authorities if required. Water Disposal Methods: Place Material and absorbent into sealed containers and dispose of in Accordance with current applicable laws and regulations.