Installation Guide

2
INSTALLING THE CABINET
Secure the sill plate and header with nails (1).
Insert the cabinet into the opening (2).
3
SECURING THE CABINET TO THE WALL
Secure the cabinet to the wall through the sides with
wood screws (not included).
Recess Mount Installation
1
PREPARING THE INSTALLATION LOCATION
NOTE: Before installing, make sure all parts are present.
Compare parts with the Hardware Included list. If any part is
missing or damaged, do not attempt to install the product.
Determine placement and mark an opening 1/2 in. taller
and wider than the cabinet (1).
Cut along the center of the wall studs (2).
4
1
1 2
2
BB
CC
AA
TOOLS REQUIRED
Claw hammer Safety goggles Phillips screwdriver Power drill
Measuring tape Wall hardware Level
HARDWARE INCLUDED
AA - Left Shelf
Clip x 2
BB - Right Shelf
Clip x 2
CC - Shelf
x 2
INSTALLING THE SHELVES
Insert the left shelf clips (AA) into the holes on the left
side of the cabinet. Repeat on the right side (BB).
Rest the shelves (CC) on the shelf clips (AA & BB).
Item #0000 000 000
Model #83010
Use and Care Guide
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.

Summary of content (6 pages)