Operation Manual
38
Working with the Gigaset N720 SPK PRO
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2316-L101-2-7619 / mess_kit.fm / 10.02.2012
Version 2, 06.08.2010
Display not in idle status
Checking the quality of the connection to the measuring base
station
Connecting the measuring handsets
If two people perform the measurements, you can check the voice quality by establishing
a connection between the two measuring handsets.
The handsets are in metering mode in idle status.
u Initiate internal call.
~ Enter the internal number of the other handset using the keypad.
Or:
u Initiate internal call.
s Select handset. Your own handset is identified by a "<" on the right.
c Press the talk key.
Calling all handsets
u Press and hold.
Switching on the continuous test tone for the base station
If you perform the measurements alone, you can play a continuous test tone to test the
connection to a measuring base station from a measuring handset.
~ Enter the number string ***O22 via the keypad.
c Press the talk key.
The test melody is played via the loudspeaker. If you have connected a headset, press the
speaker key
d to hear the melody.
Activating/deactivating the measuring handset
The measuring handset is activated automatically when it is placed in the charger. This
means that it is activated after charging in the charger.
a With the phone in idle status, press and hold the end call key (confirmation
tone) to deactivate the handset. Press and hold the end call key again to reac-
tivate the handset.
If the display is not in idle status, it shows the measure-
ment data at the top edge.
-30dBm-1-04-50H-100