User manual
Table Of Contents
- Contents
- Gigaset GS370
- Start screen
- Illustration in the user guide
- Getting to know your device
- Configuring the start screens
- Notifications
- Apps
- Downloads
- Fingerprint sensor
- “Do not disturb”
- Additional functions
- Making calls
- Contacts
- Messages (SMS/MMS)
- Device
- Security
- Accounts and location detection
- Apps
- Network connections
- System
- Customer service
- Manufacturer's advice
- Icons
62
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Network connections
Gigaset GS370 / LUG AU-IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings.fm / 11/22/17
Mobile networks
To make and receive calls with the smartphone over a mobile network, you require a SIM card
from the relevant mobile network operator. Refer to your mobile contract for which services are
available, and which terms and conditions apply.
You can insert two SIM cards into your device, i.e
. you can use two mobile networks at the same
time.
Editing settings
¤ Settings Wireless & networks – More Mobile networks
Data roaming
Permit the sending of data by the device over mobile networks of other operators whilst you
are in a region where the network of your operator is not available.
Preferred networks
Select a preferred mobile network when you are not in the area of your mobile network
operat
or.
Preferred network type
Select the preferred mobile standard, such as LTE, 3G or 2G. The smartphone uses the
net
work with the best availability as standard.
Enhanced 4G LTE Mode
Improve speech quality and other communication.
Access point names
Your mobile network operator can use these settings to determine the correct IP address for
y
our device, and so establish a secure connection for your device.
Operator
Select your provider from the networks available.
Using two SIM cards
¤ Settings Wireless & networks – SIM cards . . . Detected SIM cards in
slots 1 and 2 are displayed
Enabling and disabling a SIM card: Enable/disable the switch
Showing information:
¤ Tap an entry . . . The name of the SIM card, the colour used for the card, the mobile network
operator and the phone number are displayed. You can change the name and display colour.
Specify the preferred SIM card for the following functions:
• Mobile data
Only one SIM card can be used for mobile data transmission.
If two SIM cards are inserted into the device, the Mobile network settings screen
contains a tab for each SIM card Select the appropriate tab as required.
Additional charges can be incurred by data roaming (depending on your mobile
contract).