User Guide

Gigaset A510 IP / US eng / A31008-M2230-R301-1-6043 / configuration.fm / 1/11/12
Version 5, 23.09.2008
11
Configuring the VoIP connection
Provided that your phone is set for auto-configuration (default setting), you will see the following
display. Otherwise, for more information, see .
The configurable IP connections are shown in the following
displays (IP 1 to IP 6). VoIP connections that are already
configured are marked with
³.
> If necessary, press down on the control key w to select
a connection.
> Press the §OK§ display key to continue.
If you have received a regis-
tration name/password
and, if applicable, a user
name:
> Press the key below §No§
on the display screen.
> For more information,
see .
If you have received an auto-
configuration code:
> Press the key below §Yes§
on the display screen.
> For more information,
see .
If your phone cannot establish a connection to the Internet, one of the following messages is
displayed: IP address not available or Internet conn. not available.
> Press the right display key §OK§ to end the VoIP wizard and start the connection assistant
(step ).
Further information about possible error causes can be found in the user guide on the enclosed
CD.
IP 1
³
Back OK
10
10
¶
Do you have
auto conf code?
No Yes
9
12