Quick Start Manual

- 4 -
English
7-1 Connect cables to internal connectors and headers on the motherboard, including IDE/SATA
connectors, and front panel audio, USB, IEEE 1394 headers, etc.
7-2 Attach the front panel module (differs depending on the case design, consisting of power
indicator, hard drive activity indicator, speakers, reset switch, power switch, etc.) from the case
to the front panel header (F_PANEL) on the motherboard.
Front Panel Header
MSG: Message/Power/Sleep LED
PWR: Power LED
PW: Power Switch
SPEAK: Speaker
HD: Hard Drive Activity LED
RES: Reset Switch
CI: Chassis Intrusion Header
Once the steps above have been completed, connect
the peripheral devices to the computer, such as the
keyboard, mouse, monitor, etc. Then connect the power,
turn on the system, and install all required software.
Power Supply Power Switch
PS/2 Keyboard Port Power Cord Connector
DVI-D Port PS/2 Mouse Port
HDMI Port D-Sub Port
eSATA Port S/PDIF Connector
IEEE 1394 Port USB Ports
Audio Jacks RJ-45 LAN Port
External Graphics Card
Step
7
Connecting Cables to Internal Connectors
Step
8
Connecting Peripherals
Back Panel of the Case
(Note) The pin assignments for the front panel header may differ by model. Refer
to the motherboard user's manual for the actual pin assignments.
1
2
PinAssignmentsA:
19
20
+MSG-
+HD-
+PW-
-CI+-RES+ +PWR-
+SPEAK-
PinAssignmentsB:
+MSG-
+HD- -RES+
NC
+PW- +SPEAK-