User's Manual

5.3 Choosing your synchronization type

USB cable

You can connect your device with other devices via a mini-USB connector. You can manually change the connection

settings as follows. The new settings will be used when you connect your device to the PC next time.

1. Ta

p Start > Programs > ActiveSync.

2. Ta

p Menu tab > Connections.

3. Ch

oose USB in the drop-down menus and check Synchronize all PCs using this connection.

Bluetooth connection

You can also synchronize your information by using Bluetooth wireless connectivity technology, which allows your

device to connect to a Bluetooth-compatible device within 10 meters. For best connection results, it is recommended

that you connect the device to the PC using USB to establish a synchronization relationship before connecting via

Bluetooth.

To synchronize via Bluetooth connection:

xecute ActiveSync Help on the PC and follow the instructions for conguring Bluetooth on your PC to support

ActiveSync.

2. T

p Start > Programs > ActiveSync.

3. Ta

p Menu > Connect via Bluetooth. Ma

ke sure that the device and the PC are within 10 meters or shorter.

4. Tap Sync.

5. After nishing the synchronization, tap Menu > Disconnect Bluetooth.

6. Turn off Bluetooth to preserve battery power if not used.

Please note: Before you connect to this PC via Bluetooth, please make sure that you have set up a

Bluetooth partnership with the PC: Tap Start > Settings > Connections > Bluetooth.

For more details, please refer to Chapter 6 Getting Connected.

ActiveSync Synchronization Tool