Table of Contents Important Information Installation Information Technical Information Trims and Flashings Illustration Roofing Installation Details Fascia Cover (FC-5/FC-7/FC-9) Eave Drip (ED-1) Eave Flashing (EF-3) Preformed Valley (PV-1/PV-2) End Wall Flashing (EW-1) Side Wall Flashing (SW-1) Transition Flashing (TF-1) Gambrel Flashing (GF-1) Gable Rake (GR-2) Gable Rake (GR-4) High Side Eave (HS-2) Hip Cap (RC-2) Ridge Cap (RC-3) Ridge Cap (RC-8) Vented Ridge with Venturi Vent Vented Ridge with Miami Da
Important Information Miami-Dade County and Local Code Compliance Southeastern Metals’ 26 Gauge 5V-Crimp products are Miami-Dade County approved and comply with the most recent testing requirements. Contact our technical department for a copy of our current Miami-Dade County NOA compliance report if one is required for your purposes. Finishes 40-year warranted SemCoat Plus is a fluoroceram premium coating manufactured by BASF/Morton International Inc.
0-year SemCoat Plus panels are warranted against paint peel, check, chip, or crack resulting from a manufacturer’s defect for a period of 40 years from the date of invoice providing the project installation meets the limitations detailed in Southeastern Metals’ SemCoat Plus warranty document. Delivery, Handling and Storage Proper care in storing and handling metal panels is essential in providing you with years of service. Panels should be installed immediately to prevent storage oxidation or paint peel.
Installation Information Panel There are three critical measurements involving roof panels: the length required at the eave, the peak end and the amount of panel lap (if required). In each case a certain measurement is required. Check each measurement to ensure panel placement gives you the distance required at the eave, peak and endlap condition (if required). In most cases any variance can be taken out at the eave and peak.
Technical Information 5V-Crimp Panel Accelerated Testing of coating 2000 hours per ASTM G23. Salt Spray testing of coating 1000 hours per ASTM B117. Fire Testing per ASTM E108 or UL790. Wind Driven Rain Test per TAS 100. Code Approvals 1 UL Fire Resistance Directory # R20735 UL Maximum Design Pressure Listing # R20735 Miami Dade Code Approval NOA # 07-0815.06 Florida Building Code Approval # FL-11931.1 (26 Gauge) # FL-11937.
3 Trims & Flashings 4 7 6 5 2 1 10 1 Ridge Cap RC-3 5V-Crimp Eave Drip/Eave Flashing ED-1/EF-3 2 End Wall Flashing ED-1/EF-3 5 3 4 Transition Flashing TF-1 6 Ridge/Hip Cap RC-2 or RC-8 Gable Rake GR-2/GR-4
11 8 9 7 Preformed Valley PV-1 or PV-2 8 Side Wall Flashing SW-1 9 11 Gambrel Flashing GF-1 10 Pipe Boot *See Page 26 for accessories used when installing these trims and flashings. Fascia Cover FC-5/FC-7/FC-9 *Additional and custom trims are available. Please call Techinical support for more information.
Fascia Cover FC-5/FC-7/FC-9 (10’ Lengths) Eave Drip or Eave Flashing Decking Fastener by others FC-5/FC-7/FC-9 Fastener by others CL-4 Item Fascia Size “A” FC-5 2” x 6” 5” FC-7 2” x 8” 7” FC-9 2” x 10” 9” Component Details 5V-Crimp Cleat CL-4 FC-5 FC-7 FC-9 Open Hem 1 “A” 1/2” 1/2” 1/2” 1/2” 1/2” 2 1/2” 8
Eave Drip ED-1 (10’ Lengths) Butyl Sealant Tape #9 x 1-1/2" Screw # 30 Felt min.
Eave Flashing EF-3 (10’ Lengths) Butyl Sealant Tape #9 x 1-1/2" Screw # 30 Felt min. Inside Closure 5V-Crimp Panel 1" max.
Preformed Valley PV-1/PV-2 (10’ Lengths) Universal Closure Universal Closure 5V-Crimp Panel # 30 Felt min. #9 x 1-1/2" Screw PV -1/PV -2 6" min.
End Wall Flashing EW-1 (10’ Lengths) Tube Sealant Fastener by others CF-3 #30 Felt min.
Side Wall Flashing SW-1 (10’ Lengths) SW -1 #30 Felt min.
Transition Flashing TF-1 (10’ Lengths) 5V-Crimp Panel Inside Closure TF -1 #30 Felt min.
Gambrel Flashing GF-1 (10’ Lengths) #9 x 1-1/2" Screw 5V-Crimp Panel Inside Closure #30 Felt min.
Gable Rake GR-2 (10’ Lengths) #30 Felt min.
Gable Rake GR-4 (10’ Lengths) #9 x 1-1/2" Screw 5V-Crimp Panel Butyl Sealant Tape #30 Felt min.
High Side Eave HS-2 (10’ Lengths) Outside Closure HS -2 #9 x 1-1/2" Screw # 30 Felt min.
Hip Cap RC-2 (10’ Lengths) RC -2 Option 1 #30 Felt min. 5V-Crimp Panel #9 x 2-1/2" Screw Universal Closure 1 1/2" Max. Decking Butyl Sealant RC -2 Option 2 6" Seal Tape #9 x 2-1/2" Screw #30 Felt min. 1 1/2" 5V-Crimp Panel Max.
Ridge Cap RC-3 (10’ Lengths) RC -3 #9 x 1-1/2" Screw Outside Closure # 30 Felt min. 5V-Crimp Panel 1 1/2" Max.
Ridge Cap RC-8 (10’ Lengths) RC -8 # 30 Felt min. Outside Closure #9 x 1-1/2" Screw 1 1/2" 5V Crimp Panel Max.
Vented Ridge with Venturi Vent JC -6 Venturi Vent RC -8 #9 x 2-1/2" Screw 5V-Crimp Panel Outside Closure 3" min. Decking #30 Felt min.
Vented Ridge with Miami Dade Profile Vent RC -8 #9 x 1-1/2" Screw 5V-Crimp Panel # 30 Felt min. Profile Vent Decking 3" min.
Pipe Boot Ventilation Pipe Silicone Sealant Around Cut of Boot (optional) Pipe Boot 1-1/2" Screws Spaced 1" Around Base of Pipe Boot Note: Butyl sealant tape under base of Pipe Boot 5V-Crimp Component Details Standard Pipe Boot Zipper Pipe Boot 24 Flashing Pipe Boot
Fastener Guide Fastener Size Finish Application #9 - 1 1/2” Painted #9 - 1 1/2” Mill Finish Fastening galvanized based panels or trims to a wood substrate #9 - 2 1/2” Painted #9 - 2 1/2” Mill Finish #9 - 1 1/2” Painted #9 - 1 1/2” Mill Finish #9 - 2 1/2” Painted #9 - 2 1/2” Mill Finish Woodscrew Woodscrew Woodscrew Woodscrew Fastening galvanized based panels or trims to a wood substrate Fastening galvalume or galvanized based panels or trims to a wood substrate Fastening galvalume
Sealants and Accessories Hip Sealant Tape Butyl Sealant Tape Tube Sealant PAINT 5V-Crimp Venturi Vent Inside Closure Strip Profile Vent Outside Closure Strip 26 Touch Up Paint Universal Closure Strip
Helpful Formulas Rise and Run Multiply Flat Area by Roof Calculator LF of Hips or Valleys per LF of Common Run Height = 1/2 Span x Rise/Run (common run) Height = Span x Pitch Slope = Common Run x Factor Decimal Fraction of a Foot Inch Fraction 2 in 12 1.041 1.424 1” .083 3 in 12 1.031 1.436 2” .167 4 in 12 1.054 1.453 3” .250 5 in 12 1.083 1.474 4” .333 6 in 12 1.118 1.500 5” .417 7 in 12 1.158 1.530 6” .500 8 in 12 1.202 1.564 7” .583 9 in 12 1.250 1.600 8” .
* 1:12 2:12 3:12 4:12 5:12 6:12 7:12 8:12 9:12 10:12 11:12 12:12 Ridge Cap 135° 170° 161° 152° 143° 135° 127° 120° 113° 106° 100° 95° 90° Hip Cap 148° 173° 166° 160° 154° 148° 143° 138° 133° 130° 126° 123° 120° Pre-formed Valley 136° 172° 162° 152° 144° 136° 128° 120° 114° 108° 104° 98° 90° High Side Ridge 67° 87° 81° 76° 71° 67° 63° 60° 56° 53° 50° 47° 45° Eave Flashing 90° 94° 99° 104° 108° 112° 116° 120° 123° 126° 128° 132°