User's Guide

16
3.1.2.2 Configure the routing software:
• In the Windows system tray, right-click the WinRoute icon and select Administration.…
• On the Settings tab, select “2nd network adapter”.
• From the Network adapter drop-down list choose any adapter other than the WIDCOMM
adapter and click the Settings button.
• On the DHCP tab, in the Adapter drop-down list, select the WIDCOMM Bluetooth Windows 9x
Adapter.
• Select Enable DHCP Server.
• Fill in the client IP address range fields:
• From—210
• To—240
• Click OK and then minimize (do not close) the WinRoute Administration configuration panel.
3.2 BLUETOOTH SERIAL PORT
The Bluetooth Serial Port service allows two Bluetooth devices to establish a wireless connection
through virtual communications ports and then use that connection as if it were a hardwired serial
cable between the devices.
To establish a Bluetooth serial port connection:
Connections are initiated from the client:
1.On the client, in the Folders pane of My Bluetooth Places, select Entire Bluetooth
Neighborhood.
2.In the right pane of Entire Bluetooth Neighborhood, right-click anywhere except on a device
name and select Refresh from the pop-up menu.
3.In the Folders pane of My Bluetooth Places, right-click the server you want to establish a
connection with and select Discover Available Services from the popup menu to update the
available services list. The available services will be displayed in the right pane of My
Bluetooth Places.
4.In the right pane of My Bluetooth Places, double-click Bluetooth Serial Port. A dialog box
appears that contains the communications port number assigned to this connection by the
client. The application that will use this connection must be configured to send data to this
port.
Depending on the security configuration, the dialog box that provides communications port
information may not appear until after Authentication and Authorization have been accomplished.
The application on the server must be configured to use the correct communications port.
To determine the communications port being used by the service: