User's Manual

5. Click Pre-logon/Common.
6. Click Add to open the General Settings.
7. Profile Name: Enter a descriptive profile name.
8. WiFi Network Name (SSID): Enter the network identifier.
9. Operating Mode: Network (Infrastructure) is selected by default.
10. Administrator Profile Type: Pre-logon/Common: Active when a user is logged
on. This profile is shared by all users. This profile type is already selected.
11. Click Next.
12. Click Advanced to open the
Advanced Settings. Configure Advanced Settings and
then return to these instructions.
13. Click OK to close the Advanced Settings.
14. Click Enterprise Security to open the Security Settings. See
EAP-SIM, TLS, TTLS,
PEAP, LEAP, EAP-FAST for 802.1X security configuration information.
15. Click OK to save the profile and add it to the Administrator profiles list.
NOTE: If a Persistent connection was already established, a Pre-logon/Common
profile is ignored unless the profile is configured with both Pre-logon/Common
and Persistent connection options.
Remove a Pre-logon/Common Profile from a Package
1. On the Persistent tab, click the profile.
2. Click Remove.
Copy a Pre-logon/Common Profile for a Package
You can copy an existing profile, giving the copy a new name. You can edit the new profile.
You may want to do this in order to have two similar profiles. To copy a profile:
1. Select the profile.
2. Click Copy.
3. Enter a new profile name.
4. Click OK.
The new profile is saved. This new profile has the same properties as the original.
Edit a Pre-logon/Common Profile for a Package
1. Select the profile.
2. Click Properties.
3. Edit the properties of the new profile using the same instructions given under Create a
Persistent Profile.
Click
Creating Administrator Profiles for Enterprise Security for more information.