Use and Care Manual
For questions or comments, please call
1-866-HELLO GP (435-5647)
COMMERCIAL
Safe-T-Gard Dispenser specification and mounting sheet
TM
Safe-T-Gard is a trademark of Georgia-Pacific Corporation 2006. Georgia-Pacific Corporation. All rights reserved.
TM
Specifications:
The dispenser and waste receptacle are constructed of low maintenance, impact resistant
polymer materials. Georgia-Pacific SKU #54019 mounting bracket is the recommended
method of mounting the dispenser and waste receptacle to the wall, and is included with
each dispenser.
The mounting bracket has a release tab that allows the dispenser and waste receptacle to
be removed from the wall for easy cleaning and emptying of waste. There is a decorative
waste liner retainer included with the waste receptacle. This retainer allows a standard 12-
16 gallon waste liner to be used with the dispenser.
Capacity:
The dispenser accepts two full
packages of Georgia-Pacific SKU
#10440 Safe-T-Gard tissue. The
dimensions of the tissue are 4" W x
10" L. The capacity of the waste
receptacle is approximately 2.1
gallons.
SKU#: 59508, 59513 & 59502
Overall Dimensions:
Dispenser: 6.5"W x 11"H x 4"D
Receptacle: 7.4"W x 20.5"H x 4"D
Overall Weight:
Dispenser: 1.0 lbs. (436 g)
Receptacle: 2.2 lbs. (997 g)
15"
25" to the bottom
of the 54019 bracket
from the floor
8"
8"
54019 Mounting
Bracket Location
Screw Mounting
Holes
Screw Mounting
Holes
Dispenser
Release Tab
Receptacle
Release Tab
35" to the top of
the waste receptacle
from the floor
10"
8"
8"
Dispenser
Location
6.5"
11"
4"
7.4"
20.5"
4"
Warning: Safe-T-Gard is intended to be mounted only beside the door. Placement
on the door itself may subject the user to liability for infringement of United States
Patent 6,508,383; Lidahl, et al. Door Sanitation System, January 21, 2003.
TM
TM
When liner is not used, pull release
tab located on the bottom of trash
can to empty waste
Sticker Location
10-13-06 Rev. B