Installation & Assembly

ManualsBrandsGeorge Oliver ManualsBathroom Remodel & Bathroom FixturesCrumley 31" Wall-Mounted Single Bathroom Vanity Set

Table Of Contents

6: 400400

Parts List (Included)

Mark the position of the holes for the expansion bolts on the

wall by measuring the space between the mounting brackets

on the back of the vanity. Vertical position (X) is decided by

the user, remember to mark low enough to accommodate the

sink on the top of the vanity counter or it will be to high when

installed. Use a spirit level to ensure the screws holes are in

line.

Draw horizontal line

Mark the screw position

Drill the holes

for screw

Step 1

Step 5 Step 6

Use a spirit level to ensure the vanity is level from left to right

and front to back, adjust if needed.

Step 4

Attach the vanity to the wall by lowering the bracket onto the

bolts. Put on the washers and the nut, and use the adjustable

wrench to tighten again.

Step 3

Put the countertop on the top of vanity, and check if it stay

firm on the vanity.

Finally, place the countertop again to check the stability.

NOTE: SINK STYLE, SHAPE, FAUCET HOLES, CUTOUT ON TOP, VANITY MAY VARY FROM THE PICTURE ABOVE.

INSTRUCTIONAL PURPOSE ONLY.

Wall

take out drawerpress the pinspull out drawer

INSTALLATION

TIPS:

Insert the expansion bolts into the pre-drilled holes, then put

on the washers and the nut, and use the adjustable wrench to

tighten the nut in order to expand the bolt inside the wall.

Loose the nut and washers once the bolts fixed inside the wall.

Remember to keep out 0.5" of the thread for hanging the

cabinet on.

Step 2

Tools List (Not included)

Spirit Level

Tape Measure

Pencil Electrtic Drill

Drill Bit

Adjustable

wrench

Silicone

Expansion bolt

(2sets)

Parts List (Included)

(Counter top sold separately)

Professional installation is recommended.