Product Brochure

ManualsBrandsGentex ManualsKitchenHardwired Interconnected CO Alarm with Dualink and Relay Contacts

CO1209 Series

Carbon Monoxide Alarm

120 VAC with 9V Battery Back-Up Single/Multiple Station Carbon Monoxide Alarm

24 units per carton, 24 pounds per carton

Applications

The CO1209 Series of electrochemical sensor carbon monoxide alarms is for use

as an evacuation device in all dwelling units, including but not limited to homes,

apartments, hospitals, hotels and motels. The CO1209 Series is engineered to virtually

eliminate nuisance alarms and deliver outstanding performance wherever reliable CO

protection is required.

The CO1209 Series is provided with a 9V alkaline battery for back-up in the event

building power is lost. The battery drawer provides easy replacement without

removing the unit from the wall or ceiling.

The Gentex CO1209 Series is provided with a push button test that simulates an actual

CO condition in full compliance with NFPA 720 and UL Standards.

Features of the CO1209 Series include DUALINK® tandem capabilities with Gentex

tandem interconnect capable alarms products. Options include Form A/Form C dry

contacts for remote annunciation. A signal indicating CO sensor has reached end of

life and solid state red LED to indicate CO presence. Options include Form A/Form C

dry contacts for remote annunciation.

The CO1209 Series is ANSI/UL 2034 and are warranted for one year from date of

purchase.

Standard Features

• 120 VAC with 9V battery back-up

• Electrochemical sensor

• Horn frequency 3100 Hz (nominal)

• Temporal 4 sounding pattern for CO annunciation

• Push button self test and functional test feature

• Optional auxiliary Form A/Form C relay contacts (F model)

• Relay contacts operate on battery back-up

• Relay contacts operate when on battery back-up

• Quick-disconnect wiring harness

• DUALINK® - tandem with all Gentex tandem capable alarms

• Non-latching (self restoring) alarm

• LED for AC power on

• Red LED pulses every 15-30 seconds

• Solid state red LED to indicate CO presence

• Mounting hardware adapts to standard junction boxes

• Dust cover to prevent contamination during installation

• Low or missing battery indicator

• End of life signal indicates CO sensor has reached depletion state and time to replace

• One year warranty from date of purchase

Product Listings

• ANSI/UL 2034 Listed

• CSFM: 5276-0659:143

Product Compliance

• NFPA 720

• IBC/IFC/IRC

• City & State Ordinances & Laws

• Quality Management System is certied to:

ISO 9001:2008

Assembled

in the USA

Summary of content (3 pages)

PAGE 1
CO1209 Series Carbon Monoxide Alarm 120 VAC with 9V Battery Back-Up Single/Multiple Station Carbon Monoxide Alarm 24 units per carton, 24 pounds per carton Applications The CO1209 Series of electrochemical sensor carbon monoxide alarms is for use as an evacuation device in all dwelling units, including but not limited to homes, apartments, hospitals, hotels and motels.
PAGE 2
CO1209 Series Model Part Number Voltage (VAC) CO1209 918-0009-002 120 VAC CO1209F 918-0010-002 120 VAC Form A/C Contacts • Notes Electrical Specifications Tandem Wiring Diagram Relay Model • Series available in round configuration only • Utilizing DUALINK®, if CO1209 is tandem interconnected with CO alarms or combination smoke/CO alarms and CO devices go into alarm, CO alarms and smoke alarm will sound CO warning.
PAGE 3
CO1209 Series Carbon Monoxide Alarm Architect & Engineering Specifications The carbon monoxide alarm shall be a Gentex Model CO1209/CO1209F or approved equal which shall provide at least the following features and functions: • The carbon monoxide alarm shall utilize an electrochemical sensing element with expected 5-year life. • The carbon monoxide alarm is calibrated not to detect CO levels below 30PPM and will not alarm when exposed to constant levels of 30PPM for 30 days.