Installation Sheet

1.0

LONDYN-WALL

KSV1006, KSW1022, KSW1034

Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.generationlighting.com

Installation Instructions for

Londyn Wall

WALL

SAVE THESE INSTRUCTIONS!

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliant junctionNEC

boxes.

This product is safety listed for damp locations.

Incandescent version may be dimmed with a standard incandescent dimmer.

LED LEDversion may be dimmed with a dimmer. Consult lamp manufacturer

for additional information.

This instruction shows a typical installation.

PAGE 1
Installation Instructions for LONDYN-WALL Londyn Wall KSV1006, KSW1022, KSW1034 1.0 WALL GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. Incandescent version may be dimmed with a standard incandescent dimmer. LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information. This instruction shows a typical installation.
PAGE 2
Install the Fixture 1A TOOL 8 LAMP 6 FIXTURE SCREW MOUNTING PLATE JUNCTION BOX 6 6 SMALL GLASS 5 5 FIXTURE SOCKET 7 5 LARGE GLASS 7 SOCKET TUBE 7 LAMP 8 TOOL 1 2 3 4 5 6 7 8 Secure the mounting plate to the junction box. Connect the fixture to a suitable ground in accordance to local electrical codes. Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.