Installation Sheet

Installation Instructions for

Zire Vanity

1.0

990W4_9030_-ZIR

4190301, 4490302, 4490303, 4490304

WALL

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliantNEC

junction boxes.

This product is safety listed for damp locations.

Incandescent version may be dimmed with a standard incandescent

dimmer. version may be dimmed with a dimmer. ConsultLED LED

lamp manufacturer for additional information.

This instruction shows a typical installation.

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

7400 Linder Ave, Skokie, 160077IL

800.969.3347

www.generationlighting.com

The "Generation Lighting" graphic is a registered trademark of

Generation Lighting. Generation Lighting reserves the right to

change specifications for product improvements without notification.

SAVETHESE INSTRUCTIONS!

PAGE 1
Installation Instructions for 990W4_9030_-ZIR Zire Vanity 4190301, 4490302, 4490303, 4490304 1.0 CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. WALL Use minimum 90°c supply conductors. GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations.
PAGE 2
Install the Fixture 1A 7 LAMP COLLAR NUT SPACER MOUNTING PLATE JUNCTION BOX 6 SHADE 3 5 SOCKET 4 CAP NUT MOUNTING STUD 1 Secure the mounting plate to the junction box. 2 Connect the fixture to a suitable ground in accordance to local electrical codes. 3 Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut. 4 Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.