Owner's manual

Page 8

owners manual

rp-x

SELECTING THE PARAMETERS TO EDIT IN THE SELECTED PARTS (CH): SOUND

The current default value of the selected parameter, is show

in the display. In the part number 1 the sound is: GRAND

PIANO. Please refer to the sound list included at the end of

the manual.

SELECTING THE PARAMETERS TO EDIT IN THE SELECTED PARTS (CH): VOLUME

Volume -

Volume +

Part disabled

The rp-x has a database with 50 sounds in total.

Once you have selected the PART you wish to modify

(#01 in this example), the EDIT menu parameter are

selected by pressing the EDIT button. Each time you

press the button a different parameter is selected.

Pressing the DATA

button you select the next sound

in the sound database.

Each time you press the DATA button a next sound

is selected.

To select the VOLUME parameters of the selected PART

(CH) sound, press the EDIT button once more time. The

current default value of the parameter is indicated in

the display. Volume = 100 in this example.

You can increase or decrease the volume level, by

pressing the DATA buttons. The display show

you in realtime the value changing.

Once you have reached the VOLUME = 000, (minimum sound

level), by pressing once more again the DATA button you'll set

the selected part OFF, then the part is disabled.

NOTE