User's Manual

20-496 Owner’s Manual Draft Page 56/78
talkgroups only these talkgroups are specified in the ID list and not locked out.
Toggling Open and Closed Modes
To toggle Open or Closed Mode state for a bank, press FUNC, 5 while stopped on a channel in the bank in
SCAN, MAN or PGM modes. The scanner will briefly display Bank OPEN or Bank CLOSED to indicate the
new Open or Closed state for the bank.
Manual ID Lockout Toggle
1. Press PROG.
2. Press TRUNK.
3. Press FUNC, and then ^ or v to move to the desired bank.
4. Press ^ or v to select the ID memory.
5. Press L/OUT to toggle the lock out status of the selected ID.
ACTIVATING ID LOCKOUT WHILE SCANNING
When scanning a trunked radio system in Open Mode, you can lock out a trunked ID by pressing L/OUT
while the scanner is stopped on a voice call. If the ID has not been previously entered into the ID list for that
bank, it will be added and locked out automatically.
When scanning a trunked radio system in Closed Mode, it is possible to lock out an ID by pressing L/OUT
while the ID is active with a voice call.
Reviewing Locked-Out Talkgroup IDs
You can easily review and clear locked talkgroup IDs in the ID list. This process is similar to finding and
clearing locked out conventional channels, except it is performed while in a trunked ID list.
1. Press PROG and then TRUNK.
2. Press FUNC, and then L/OUT. The first locked out ID in the ID list is displayed.
3. Press L/OUT to unlock the selected ID, or press FUNC, and then L/OUT again to continue reviewing
locked IDs.
Changing from ID Text Tag Display to ID Code Display