Specification Sheet

Product Data:
 Density: 8.49 +/- 0.2 lbs.
 Weight Solids: 28.0 - 30.0%
 Volume Solids: 26.5 - 28.5%
 Viscosity: 40 - 50 seconds
 Method: Ford #4 @ 77 F.
 pH: 7.0 - 8.0
 V.O.C.: 228 g/l ( 1.90 lbs/gal)
excluding water
 % VOC: 7.9%
 V.O.C. Supplied: 80 g/l (0.67 lbs/gal)
 % HAPS: 0%
 Storage: Protect from Freezing
 Pass KCMA: Yes
Container: Gals, Pails, & Drums
Sheen: Not Applicable
Dry Time @ 70
O
F and 50% R.H:
 Dry: 10 - 30 minutes
 To Sand: 30 minutes -2 hours
 To Topcoat 30 minutes -2 hours
Classification:
Water Based Sanding Sealer
Product Description:
Enduro Sanding Sealer is a high quality sanding sealer
that provides excellent protection for demanding wood
applications such as kitchen cabinets and commercial fur-
niture. Designed as a sanding sealer and base coat for all
of General Finishes water base topcoats, it provides excel-
lent adhesion, water and chemical resistance. Enduro
Sanding Sealer is high solids, builds rapidly, and dries
fast to form a hard, durable base coat. It sands easily with
minimum effort without clogging paper.
Enduro Sanding Sealer is non flammable, low odor, and
cleans up with soap and water. Its superior water and per-
formance properties makes it ideal for applications that
require KCMA protocol.
General Finishes ENDURO CROSSLINKER may be added
to Enduro Sanding Sealer if increased performance prop-
erties are warranted.
Application:
HVLP: Use a 0.043” - 0.051” (1.1—1.3 mm) nozzle / tip as-
sembly & Medium Air Cap. Air-Assisted Airless: 0.009—
0.013” tip, 350—600 psi fluid pressure, 5—20 psi air pres-
sure. Airless: 0.009”—0.011” tip. Allow 30 minutes -2
hours dry before sanding (temperature / humidity depend-
ent). Sand with #320 micron or finer between coats. 1—2
coats recommended.
General Finishes, 2462 Corporate Circle, East Troy, WI 53120
800.783.6050 (F) 262.642.4707
www.generalfinishes.com
The industry leader in water based technology.
SANDING
SEALER
ENDURO