TDS

The industry leader in water based technology.
NOTICE: All of the above statements, recommendations, suggestions, and data concerning the subject material are based on laboratory results and
believed to be reliable. We expressly do not represent, warrant, or guarantee the accuracy, completeness or reliability of same, or the material or
the results to be obtained from the use thereof, neither do we warrant that any such use, either alone or in combination with other materials shall be
free of the rightful claim of any third party by way of INFRINGEMENT or the like and (THE MANUFACTURER DISCLAIMS ALL
WARRANTIES, EXPRESSED OR IMPLIED,) OF MERCHANTABILITY and FITNESS FOR A PARTICLUAR PURPOSE.
GF Oil Base Stain-050211
Mixing and Application:
Catalyst Ratio: None
Pot Life: Not Applicable
Shelf Life: 1 year, minimum
Reducer/Thinner: Mineral Spirits (10 -20%)
Sealer & Finish Recommendation:
Can be topcoated with most water base, oil base, and sol-
vent base finishes, varnishes, & lacquers. Compatible
with all General Finishes topcoats. Test adhesion and
compatibility on all other systems.
For best results topcoat with General Finishes Arm-R-Seal
in the desired sheen. May also topcoat with General Fin-
ishes Oil Base Gel Satin topcoat. General Finishes Oil
Base Stain may also be topcoat with water base finishes if
first evaluated for proper adhesion before proceeding. Al-
low a minimum of 72 hours dry before topcoating with wa-
ter base topcoats.
Surface Preparation:
Surface must be clean, dry and free of dust, dirt, grease, wax,
or contaminants. For soft woods, sand with #120 grit & finish
with #150 -#180. For hard woods, sand with #100 grit & finish
with #120. Fill all nail holes or cracks using a stain-accepting
filler or putty. Remove all dust by vacuuming or wiping with a
damp cloth. Do not use tack cloths which contain linseed oils.
Application:
 Conventional Spray
 Spray
 Brush
 Pad Applicator
 Clean wiping cloth
Cautions:
 Mix container before use
 Use with proper ventilation
 Read MSDS for safety information
Clean-up Information:
For best results, clean all equipment
with Mineral Spirits.