Installation Guide

V5 Node B Installation Guide
Version 1.0.5 Page 25 of 44
Precautions
The following precautions and checks are applicable to all mounting types:-
 Connectors have been manufactured to fit their specific cables and function. Do not
modify or force connectors.
 Check Site Plans for engineering approval.
 Ensure that good ground resistance is available at the installation site (10)
 Where installed in an outdoor enclosure attention should be paid to cooling and
water+dust sealing prevention refer to Table 4-1.
Rack Mounting – Installing Digital Shelf
Ensure the shelf or shelf supports are secure, then insert the digital shelf into the rack and
secure from the front.
Notes:
 If there is no rear access it may be required to make the ground connection prior to
inserting the shelf into the rack.
 Where additional securing is required at the rear this shall require custom brackets
depending on the rack specifications/construction.
Figure 5-6: Installing Control Shelf