User's Manual
Table Of Contents
- About this document
- Contents
- 1 Product overview
- 2 Hardware installation
- 3 TCP/IP configuration
- 4 Accessing the CellPipe 7130 RG web configuration tool
- 5 Status
- 6 Network
- 7 WiFi Setup
- 8 Firewall Setup
- 9 Advanced Setup
- 10 QoS PTM Setup
- 11 Utilities
- 12 Telephony
- 13 USB Service
- 14 FCC and IC Statement
- A Troubleshooting
- B Product conformance
- Glossary
QoS PhoneQoS PTM Setup
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
10-7
............................................................................................................................................................................................................................................................
QoS Phone
The QoS Phone lets you configure the QoS for your SIP session.
Select QoS Phone in the QoS PTM Setup menu to access the QoS Phone window; see
Figure 10-4.
Protocol The protocol type for this QoS policy.
Priority The priority queue (0 to 7) used by the traffic.
CoS CoS value of the QoS policy.
ToS/DSCP ToS/DSCP marking setting for incoming traffic.
Change
Precedence
Select a QoS rule precedence number and then select where to move it:
• Up: move this QoS rule to higher priority.
• Down: move this QoS rule to lower priority.
• Delete: remove this QoS rule.
Click Apply to change the precedence.
Field Description