User's Manual

dapter is backwards compatible with earlier 802.11 versions.

Next to this column is the Signal column. This provides a percentage indicator of

how strongly you are receiving the signal from each wireless network to which you

can connect.

When you select a network, you will see the available information regarding this

network in the site information window on the right.

If you attempt to connect to a network that has security settings enabled, you will

need to create a profile

and supply the necessary information. Refer to your wireless

router's or access point's documentation for instructions on how to locate the

necessary security information.

Note:

If you are connecting to a Wireless Access Point, it must support the Transmit

Rate setting. If the Wireless Access Point does not support the Transmit Rate,

undesired results may occur.

Profile Setting:

If you will be connecting to different wireless networks in different areas or will be

conecting to wireless networks that have security settings enabled, you can create

profiles so that you can easily switch between networks depending on your location

or situation.

If you attempt to connect to a network that has security settings enabled, you will

need to create a profile and supply the necessary information. Refer to your wireless

router's or access point's documentation for instructions on how to locate the

necessary security information.

If you click

Add

, you will need to go through a series of screens to create a new

profile.

Select a profile and click

Edit

to modify any profiles that you have already created.