User's Manual

User Management
Configuring the Users and Groups
Cisco ISA500 Series Integrated Security Appliance Administrator Guide 276
9
• New Password Confirm: Enter the password again for confirmation.
• Group: Choose the user group to which the user belongs.
NOTE For SSL VPN or Cisco IPSec VPN users, you need to enable the
corresponding services for the user groups to which they belongs.
STEP 4 Click OK to save your settings.
Configuring Local User Groups
Groups are used to create a logical grouping of users that share the service
policies. The local database supports up to 16 groups.
STEP 1 Click Users -> Users & Groups.
The Users & Groups window opens. All existing user groups are listed in the
Groups table.
STEP 2 In the Groups area, click Add to add a user group.
Other options: To edit an entry, click Edit. To delete an entry, click Delete. To
delete multiple entries, check the boxes of multiple entries and click Delete
Selection.
After you click Add or Edit, the Group - Add/Edit window opens.
STEP 3 In the Group Settings tab, enter the following information:
• Name: Enter an unique name that contains the letters, numbers, or underline
for the user group.
• Services: Specify the service policy for the user group. You can enable
multiple services for the user group.
- Web Login: Specify the web login policy for the group.
Disable: All members of the group cannot log into the Configuration
Utility through the web browser.
Read Only: All members of the group can only read the system status
after they login. They can not edit any configuration.