Manual

Oven Control, Clock & Timer
l,l?_ll Oven
Clock
The clock mu,st be set Jbr the automatic oven timing"
J)tmtion,_ to work proper@
The time of day clock cannot be changed
during Delay Start. (It can be changed during
a regular bake or broil operation.)
7b set
the clock
1 Press the CLOCK pad.
2 Press the nmnber pads the sanle way you
read them. For example, to set 12:34, press
the nmnber pads 1, 2, 3 and 4 in that order.
If nmnber pads are not pressed within one
minute atter you press the CLOCK pad, the
display reverts to the original setting. If this
hal)pens, press the CLOCK pad and reenter
the time of day.
3 Press the START pad. This enters the time
and starts the clock.
To check the time of day when the display is
showing other information, simply press the
CLOCK pad. The time of day shows tmtil
another pad is pressed.
q)®®®®®®®®®
If a flashing time of day is in the display,
wm have experienced a power thilm'e.
Reset the clock.
To reset the clock, press the CLOCK pad.
Enter the correct time of day by pressing
the ai)propriate nmnber pads. Press the
START pa d.
77met
NOTE: Tke timer is in@endent oi all tlw other'
fitnction,s and it do¢,_not control the oven. Tke
CLEAR/OFF pad doe,_ not qffi,_t the tbm,:
You may program the timer to time cooking
or other household activities for up to 9 horn's
and 59 minutes.
The timer c(mnts down in minutes, 1 minute
at a time, tmtil the last 60 seconds are reached.
Then the control will beep one time. The
seconds will not be displayed until the last
minute is reached.
When the timer reaches " :00," the control
will beep 3 times fl)llowed by one beep every
6 seconds tmtil the TIMER ON/OFF pad is
pressed.
The 6-second tone can be canceled by
following the steps in the Special Features
of Yore" Control trader Tones at the End of
a Timed Cycle.
13