Manual

Oven Control, (;lock & Tinier
I,Dlll Oven
(,'lock
The c[od_ must be set/or the atttomatic oven limit_g"
./Unctions to work properly.
The time of day clock cmmot be changed
during Delay Start. (It can be changed during
a regular bake or broil operation.)
7b set
the clock
1 Press the CLOCK pad.
2 Press the number pads the same way you
read them. For example, to set 12:34, press
the number pads 1, 2, 3 and 4 in that order.
If number pads are not pressed within one
minute atier you press the CLOCK pad, the
display reverts to the original setting. If this
happens, press the CLOCK pad and reenter
the time of day.
3 Press the START pad. This enters the time
and starts the clock,
To check the time of day when the display is
showing other intormation, simply press the
CLOCK pad. The time of day shows until
another pad is pressed.
@
@®®®®®®®®®
I_o_uey
failure
If a flashing time of day is in the display,
you have experienced a power thilure.
Reset the clock.
To reset the clock, press the CLOCK pad.
Enter the correct time of day by pressing
the al)propriate number pads. Press the
START pad.
7 mer
NOTE: The timer is ind@endent (?/all the other*"
,fi_n_tions and it doe,_ not _onlrol the oven. The
CLEAR/OFF pad doe,_ not q]f, ct the lime*'.
You may program the timer to time cooking
or other household activities tot up to 9 hours
and 59 minutes.
The timer counts down in minutes, 1 minute
at a time, until the last 60 seconds are reached.
Then the control will beep one time. The
seconds will not be displayed tmtil the last
minute is reached.
When the timer reaches " :00," the control
will beep 3 times fi_llowed by one beep every
6 seconds tmtil the TIMER ON/OFF pad is
pressed.
The 6-second tone can be canceled bv
fl>llowing the steps in the Special Features
of Your Control trader Tones at the End of
a Timed Cycle,