Installation guide

Installation Instructions
Cutouts for Single Built-In-Oven
Allow 7/8"
for overlap of
oven over side
Cabinet
Width Junction Box Cabinet Width 27
27" Location
Recommended
Cutout Location
from Floor 32 1/2"
2" x 4" or
equivalent
runners
20,,_
Allow a minimum of 20"
for clearance to adjacent
corners, drawers, walls, etc.
when door is open
Allow 1" for
overlap of oven
top and bottom
of cutout
22" Min.
above base
rail
5/8" MIN.
28 1/8" MAX.
/
Alternate
junction box
location
Recommended
cutout location
from floor
32 1/2"
Cutout Depth 23 1/2"
Cutout Width 25" Min.
25 1/4" Max.
Cutout Height
27 5/8" Min.
28 1/8" Max.
NOTE: If the cabinet does not
have a front frame and the
sides are less than 3/4" thick,
shim both sides equally to
establish the cutout width.
=
If the cabinets do not have a solid
bottom, then two braces or runners
must be installed to support the
weight of the oven. For single
ovens the runners and braces must
support 150 pounds.
2" x 4" or
Equivalent
Runners
]
24"
J
J
J
_t
i"_ 18'_1
27
This Oven is not approved for stackable
or side by side installation