Installation guide

Cabinetry
Built-In Ovens
Frameless
cabinets
Frameless
Trim Stripor UpperCabinetShelf
With FinishedEndslike Cabinet
Sides.1/2" Min. Deepfor Oven
FlangeOverlapandClearance.....
CabinetDepth23 5/8" Min: ........
From InsideBackto Front
of CabinetFrameor Side
Panel, ExcludingDoors
or DrawerFronts.
Shelf CutBackFlushwith
Frontof Side Panel.
.........................27.............................
0
0
....... 25"Min..............
25-3/4"Max.
i i;;:::....................
0
0
..- --- --- --- .--i/- --- .
DoubleOvens
49-11/16"Min.
Single Ovens
27-1/2"Min.
FabricateFiller
............... Panelif Necessary,Similar
to DrawerFront or
UpperCabinetDoors
or OrderAdditional
DrawerFront
Instal] I/2" Cleatsto
....... " HoldOvenMounting
Screws,MeasureOven
to FindExactLocations.
FinishedTrim Strip1" Min.
............. Deepfor OvenFlangeOverlap
and Clearance
Io ObtainMinimum Required
Installation Heightfrom
Floorit maybe Necessary
to install a LowerFiller Pane],
Use the information in this dimension drawing for
typical fi'ameless cabinets. The front face of the oven
will be flush with cabinetry doors or drawers.
Whenever possible, order 27" fl'ameless cabinet with
the cutout sized to fit the oven. If you are using stock
cabinets, additional finished filler pieces may be
required to cover openings.
Rough opening for single and double ovens:
• Depth 23-5/8" min. from inside back to fi'ont of
cabinet or side panel, excluding doors or drawer
fronts.
If the cabinet is not 23-5/8" deep, the back of the
cabinet should be cutout. The cutout should be
minimized in order to maintain structural strength
and squareness of the cabinet.
• Width 25" min.
Frameless cabinet inside width may be up to
25-3/4". Add 1/2" cleats to the sides, flush with
the fi'ont edge of the side panels to accept
mounting screws.
• Height for double oven 49-11/16" min.
• Height for single oven 27-1/2" min.
Both single and double ovens require 7/8" overlap
around edges of opening on both sides and bottom.
Allow 1/4" for top overlap.
• Allow 1/8" clearance between top of oven and
cabinet door or panel and 1/8" between bottom of
oven and cabinet drawer.
• Installation of double oven requires a total height of
51" including clearances at top and bottom.
• Installation of single oven requires a total height
of 28-13/16" including clearances.