Daintree® Networked Wireless Wall Dimmer (WWD2) In-Wall Mounting, 2 Buttons Installation Guide Installation 1 4 Usea standard screwdriver to remove the devices from the back housing Install the main body of the device into the back housing. 2 Separate the battery cover from the device. Pull the plastic insulation strip out of the battery compartment. Put the battery cover back on the device. 5 Install the faceplate onto the device.
Daintree® Networked Wireless Wall Dimmer (WWD2) In-Wall Mounting, 2 Buttons Installation Guide Battery Replacement 1 4 The device’s LED flashing every 30 seconds indicates that the batteries need to be replaced. Install the main body of the device into the back housing. 2 Remove the device from the back housing. 5 Install the faceplate onto the device. The device will rejoin its network automatically. 3 Product Dimensions 9.00 70.00 45.00 32.80 114.20 66.50 3 106.50 27.
Daintree® Networked Wireless Wall Dimmer (WWD2) In-Wall Mounting, 2 Buttons Installation Guide Product Overview Technical Data Product Specifications Dimensions 114mm H x 70mm W x 36mm D Weight 130g Power Supply (4) AAA1.
Daintree® Networked Wireless Wall Dimmer (WWD2) In-Wall Mounting, 2 Buttons Installation Guide Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.