Manualshelf

Spec Sheet

ManualsBrandsGE ManualsCooking Appliances36 Inch Telescopic Downdraft Hood with 500 CFM Motor, Variable Fan Speed, Dishwasher Safe Mesh Filters, and Hidden Design: Stainless Steel
123
UVD6361SP
Universal 36" Telescopic Downdraft System
For answers to your Monogram, GE Café
™
, GE Profile
™
or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center
®
Service, 800.626.2000.
Specification Revised 1/21
NOTE: Telescopic downdraft vents are not
recommended to be installed with cooktops
that are flush mounted.
Approved for use with the following Monogram,
GE Profile
™
Series
and GE
®
Series cooktops–36"
electric models, 36" gas-sealed burner models
and 36" induction models.
NOT APPROVED FOR USE WITH STANDARD
BURNER GAS COOKTOPS.
NOTE: The countertop must be at least 26" deep with
a flat surface area of 23-1/2" or more, front to back.
In addition, other clearances to the front edge of the
countertop must be considered.
NOTE: Dimensions shown are for reference only.
Before cutting out countertop, refer to instructions
packed with downdraft and cooktop.
NOTE: Installation on cabinets/countertops against
the wall will not be possible in most applications.
Against the wall installations are limited to
dimension requirements. Refer to installation
instructions packed with product for further details.
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
2.0
4.0
2.4
2.0
7.0
18.3
29.5
36.5
3.5
0.4
22 1/4″
36″
32 1/4″
Open Chimney View
UVD6361SPSS, UVD6361DPBB

Summary of content (3 pages)