Brochure
GE Oil & Gas
Specialty Wellheads
Pressure Control Electric Submersible Pump (ESP) Completions
GE © 2013. All rights reserved.
10/13, PC #09-0254 rev 2
geoilandgas.com/pressurecontrol
Special wellhead completion equipment is required when
using an Electric Submersible Pump (ESP) to provide articial
lift. This equipment must isolate the power cable from the
wellbore and pass it through both the tubing hanger and
adapter to the exterior of the wellhead. GE Oil & Gas Pressure
Control, a long-time manufacturer of tubing heads and
hangers, oers a wide range of solutions to match your
preferred ESP requirements.
Features —
• Field-proven design
• Available in pressure ratings up to 5,000 psi
• Equipped with a full complement of integral lockscrews
(PC #05-0225) for tubing hanger retention
• Tubing head adapters available with rotating ange to
simplify equipment make up and tree orientation by
eliminating the requirement to align the tubing hanger
• Interfaces with most manufacturers’ wellhead penetrators
• Designed to your ESP manufacturer’s specications
• Accommodates concentric or eccentric hanger
applications
• Available with or without control line exit blocks
• Includes a back pressure valve preparation
• Meets API 6A, 19th Edition requirements
• Meets PR-2 requirements
Seal Sleeve ESP Completion
295-4759
Extended Neck ESP Completion
295-4760