Dimensions Guide

Listed by
Underwriters
Laboratories
Specification Revised 1/16
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
24" Min
10-3/16"
1-3/4"
11-3/4"
18-1/2"
30"
*Height
to
Ceiling
30" models require a 30"-wide opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling heights
(10' with optional high ceiling kit JXDC71)
PVW7301SJ_EJ
The vent hood must be installed 24" min. above the cooking surface. For optimal performance, installing the
hood more than 36" above the cooking surface is not recommended. The hood installation height above the
cooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from
the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood. However, when
installed for recirculating operation, the optional charcoal Filter JXCF71 will need to be purchased separately.
24" Min
10-3/16"
1-3/4"
11-3/4"
18-1/2"
30"
*Height
to
Ceiling
30" models require a 30"-wide opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling heights
(10' with optional high ceiling kit JXDC71)
PVW7301SJ_EJ
The vent hood must be installed 24" min. above the cooking surface. For optimal performance, installing the
hood more than 36" above the cooking surface is not recommended. The hood installation height above the
cooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from
the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood. However, when
installed for recirculating operation, the optional charcoal Filter JXCF71 will need to be purchased separately.
INSTALLATION INFORMATION:
Before installing, consult Use & Care/installation instructions
packed with product for current dimensional data.
OPTIONAL ACCESSORIES
JXDC71SS/ES-10(ft.) Ceiling Duct Cover Kit
Max ceiling height installation with kit - 10'-0"
JXRC70-Remote Control
JXCF71-Charcoal Filter
(needed if used in recirculation mode)
AMP R ATING
120V 5.3
PVW7301SJ/EJ
GE Profile
™
Series 30" Wall-Mount Glass Canopy Chimney Hood
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
30" Models Require a 30"-Wide Opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling
heights (10' with optional high ceiling kit JXDC71)
24" Min
10-3/16"
1-3/4"
11-3/4"
18-1/2"
30"
*Height
to
Ceiling
30" models require a 30"-wide opening
*The supplied duct cover fits 7'-5" to 9'-3" ceiling heights
(10' with optional high ceiling kit JXDC71)
PVW7301SJ_EJ
The vent hood must be installed 24" min. above the cooking surface. For optimal performance, installing the
hood more than 36" above the cooking surface is not recommended. The hood installation height above the
cooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from
the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed
for recirculating operation. Parts for recirculating operation are supplied with the hood. However, when
installed for recirculating operation, the optional charcoal Filter JXCF71 will need to be purchased separately.