Specification Guide

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
PT9200SL
GE Profile
™
Series 30 in. Built-In Twin Flex Convection Wall Oven
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Listed by
Underwriters
Laboratories
ADA
COMPLIANT
Specification Revised 4/17
MOST 30" WALL CABINETS CAN BE USED
WITH THIS UNIT.
APPROVED INSTALLATIONS: Above Warming
Drawer, Below Built-in Microwave or Advantium
®
,
Side-by Side, Under Cooktop and Under Counter
NOTE: These ovens are not approved for stacking
one single wall oven over another single wall oven.
Cabinets installed adjacent to wall ovens must have
an adhesion spec of at least a 194°F temperature
rating.
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should
be placed to avoid interference with the handle.
Side-by-side installations rerquire at least 2"
between cutouts.
Only certain electric cooktops and no gas cooktops
are approved for installation above this wall
oven. See the Built-In Cooktop and Wall Oven
Combination matrix available at geappliances.com,
and read the label attached to the top of the oven
for approved cooktop models.
IMPORTANT: Electric wall ovens are not approved
for installation with a plug and receptacle. They
must be hard wired in accordance with installation
instructions.
IMPORTANT: Before installing, consult
installation instructions packed with product for
current dimensional data.
KW R ATING
240V 4.0
208V 3.0
BREAKER SIZE
240V 20 Amps
208V 20 Amps
28 5/8" (72.7) max.
28 1/2" (72.4) min.
1" (2.4) min.
Top Clearance
for Wall Oven
Beyond Cutout
1 1/4" (3.2) min.
Bottom Clearance
for Wall Oven
Beyond Cutout
Cutout Width
Cabinet Width
27 5/16" (69.4) max.
27 1/4" (69.2) min.
Cutout Width
26 1/2" (67.3)
Suggested Cutout
Location from Floor
31 1/4" min.
From top surface
of countertop to
top surface of
wall oven support
platform
2 1/2" min.
From front surface
of cabinet to front edge
of cooktop cutout
30"
Center Line Center Line
11/16" (1.8) min.
Clearance for Wall
Oven Beyond
Cutout, Both Sides
Cutout - observe
all dimensions and
requirements
Cutout - observe
all dimensions and
requirements
30 1/2" (77.5) min.
30" models
2" (5.1) min.
Junction Box
Location, Right
Hand Side Only
(may be located in
Adjacent Cabinet)
22" (55.9) min.
to Bottom of
Junction Box
23 1/2" (59.7) min.
Cutout Depth
15" (38.1) min.
Open Door Clearance
NOTE: Opening
Between Inside
Walls Must be at
Least
28 1/2"
(72.4) wide
NOTE: Allow
1/4" (0.7)
clearances from
side edges of
oven door
9 1/2" (24.1) max.
28 5/8" (72.7) max.
28 1/2" (72.4) min.
1" (2.4) min.
Top Clearance
for Wall Oven
Beyond Cutout
1 1/4" (3.2) min.
Bottom Clearance
for Wall Oven
Beyond Cutout
Cutout Width
Cabinet Width
27 5/16" (69.4) max.
27 1/4" (69.2) min.
Cutout Width
26 1/2" (67.3)
Suggested Cutout
Location from Floor
31 1/4" min.
From top surface
of countertop to
top surface of
wall oven support
platform
2 1/2" min.
From front surface
of cabinet to front edge
of cooktop cutout
30"
Center Line Center Line
11/16" (1.8) min.
Clearance for Wall
Oven Beyond
Cutout, Both Sides
Cutout - observe
all dimensions and
requirements
Cutout - observe
all dimensions and
requirements
30 1/2" (77.5) min.
30" models
2" (5.1) min.
Junction Box
Location, Right
Hand Side Only
(may be located in
Adjacent Cabinet)
22" (55.9) min.
to Bottom of
Junction Box
23 1/2" (59.7) min.
Cutout Depth
15" (38.1) min.
Open Door Clearance
NOTE: Opening
Between Inside
Walls Must be at
Least
28 1/2"
(72.4) wide
NOTE: Allow
1/4" (0.7)
clearances from
side edges of
oven door
9 1/2" (24.1) max.
28 5/8" (72.7) max.
28 1/2" (72.4) min.
1" (2.4) min.
Top Clearance
for Wall Oven
Beyond Cutout
1 1/4" (3.2) min.
Bottom Clearance
for Wall Oven
Beyond Cutout
Cutout Width
Cabinet Width
27 5/16" (69.4) max.
27 1/4" (69.2) min.
Cutout Width
26 1/2" (67.3)
Suggested Cutout
Location from Floor
31 1/4" min.
From top surface
of countertop to
top surface of
wall oven support
platform
2 1/2" min.
From front surface
of cabinet to front edge
of cooktop cutout
30"
Center Line Center Line
11/16" (1.8) min.
Clearance for Wall
Oven Beyond
Cutout, Both Sides
Cutout - observe
all dimensions and
requirements
Cutout - observe
all dimensions and
requirements
30 1/2" (77.5) min.
30" models
2" (5.1) min.
Junction Box
Location, Right
Hand Side Only
(may be located in
Adjacent Cabinet)
22" (55.9) min.
to Bottom of
Junction Box
23 1/2" (59.7) min.
Cutout Depth
15" (38.1) min.
Open Door Clearance
NOTE: Opening
Between Inside
Walls Must be at
Least
28 1/2"
(72.4) wide
NOTE: Allow
1/4" (0.7)
clearances from
side edges of
oven door
9 1/2" (24.1) max.