Specification

For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 9/18
PGS930BEL/SEL/FEL
GE Profile
™
Series 30" Slide-In Front Control Gas Range
NOTE: Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be placed
to avoid interference with the handle.
NOTE: Cabinets installed adjacent to slide-in ranges must
have an adhesion spec of at least 194° temperature rating.
INSTALLATION INFORMATION : Before installing,
consult installation instructions packed with product for
current dimensional data.
For all installations, install the required rear trim to back of
range with 4 screws provided.
ADA
COMPLIANT
36 1/4"
+/- 1/4"
29 7/8"
26 7/8"
w/o handle
29 1/2"
w/handle
47 1/2"
1 1/8"
30" min
See note A
Note A: 30" Minimum to bare cabinet, see
installation instructions heights less than 30"
18"
minimum
to cabinets
above counter
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
16"
max to
cabinets
above
counter
36"
12 1/2"
5"
2"
13"
9"
4 1/2"
4"
30"
Side Wall
supply
electrical
and
Gas
14 1/2"
30"
24"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
PGS930_JGS760
36 1/4"
+/- 1/4"
29 7/8"
26 7/8"
w/o handle
29 1/2"
w/handle
47 1/2"
1 1/8"
30" min
See note A
Note A: 30" Minimum to bare cabinet, see
installation instructions heights less than 30"
18"
minimum
to cabinets
above counter
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
16"
max to
cabinets
above
counter
36"
12 1/2"
5"
2"
13"
9"
4 1/2"
4"
30"
Side Wall
supply
electrical
and
Gas
14 1/2"
30"
24"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
PGS930_JGS760
All GE Appliances ranges are equipped
with an Anti-Tip device. The installation
of this device is an important, required
step in the installation of the range.