Installation guide

Installation Instructions
Ill PRE-INSTALLATION
All installation information on the following
pages is to be used for SINGLE and DOUBLE
oven installation!
[] Remove packaging materials. Check
behind hinges. Remove plastic on trims
and panel, all tape around the oven and
any shipping screws securing the oven
to the base pad. Use caution when lifting
the oven forward; the ovens are front
heavy.
_D DD
OB_E_ OD
A =
Broiler Pan
and Grid
Oven Racks
_ iterature
Pack
[] Open oven door and remove literature
pack, broiler pan and grid and oven
racks.
[] Remove Installation Instructions from
literature pack and read them carefully
before you begin.
[] Be sure to place all literature, Owner's
Manual, Installation Instructions, etc.
in a safe place for future reference.
Ill PRE-INSTALLATION (CONT.)
NOTE: To prevent damage to the door and
to prevent excessive microwave leakage, do
NOT remove the door on single wall oven
models or the upper oven door on double
wall oven models.
[] The lower oven door on the double
wall oven may be removed as an added
convenience during installation.
See Step 4.
DO NOT LIFT THE OVEN BY THE HANDLE!
[]
[]
Place the oven on a table or platform
even with the cutout opening. (Platform
must support 225 Ibs. single, 375 Ibs.
double.)
Remove the bottom trim from the top
of the oven. It will be installed at the end
of the installation process.
3