Installation guide

Fig. 1 -- SINGLE OVEN
NOTE. Locate an approved junction box in the
suggested location, a minimum of 23 7/8" above the
runners.
Be sure the oven support is solid enough to support
90 pounds. Also be sure the oven support is level
and straight. There is no way to level the oven
after installation.
/f a solid bottom is used instead of runners, a 6" x 10"
rectangle must be cut out of the bottom (See Fig. 1)
for optimum performance and proper air circulation.
DIMENSIONS
A. Cabinet Width
B. Cutout Width
C. Cutout Height
D. Cutout Depth
E. Cutout Location
H. Overall Height
W Overall Width
24 _'
22 1/2"
27 5/8" Min. 28 1/8" Max.
23 1/2" Min.
32 1/2"
28 1/4"
23 3/4"
Equivalent Runners
for over{ap
edges
to adjacent corners, drawers, or wails, etc
Fig. 2 -- DOUBLE OVEN
NOTE. Locate an approved junction box in the
suggested /ocaton, am n mum of 48 'above the runners.
Be sure the oven support is solid enough to support
155 pounds. Also be sure the oven support is level
and straight. There is no way to level the oven after
installation.
/f a solid bottom is used instead of runners, a 6" x 10"
rectangle must be cut out of the bottom (See Fig. 2)
for optimum performance and proper air circulation.
DIMENSIONS
A. Cabinet Width
B. Cutout Width
C. Cutout Height
D. Cutout Depth
E. Cutout Location -
H. Overall Height
W Overall Width
24" Min.
22 1/2"
48 1/8"
23 1/2" Min.
12 3/4" Min.
48 3/4"
23 3/4"
2" x 4" OR
9" RUNNERS
i__ MJN .__ i EQUIVALENT
_6, \
16"
2i" _
MIN,
2
-_ 20- MINIMUM CLEARANCE TO
ADJACENT CORNERS, DRAWERS.
OR WALLS, ETC.
JUNCTION
BOX