Installation Instructions

INSTALL TRIM PIECES
(on some models)
Skip this step if trim is not supplied with the
dishwasher.
In this step you will need the trim pieces set aside in
Step 1.
• Position the trim pieces so the lips face toward the
dishwasher door.
• Select a trim piece and press it onto the left side tub
flange. Start with the top edge and press the trim
piece completely onto the tub flange as you move
towards the bottom. Repeat for the right side tub
flange trim piece.
If you would like to order the Trim Kit from GE Appliances
Service, please call 800.GE.Cares (800.432.2737) and
request part number WD08X10094 for BB models or
WD08X10096 for WW or CC models.
Dishwasher Installation
SLIDE DISHWASHER
THREE-FOURTHS OF
THE WAY INTO CABINET
IMPORTANT – Do not push against front panel with
knees. Damage will occur.
• Grasp the sides of the front panel and slide
dishwasher into the opening a few inches at a time.
• As you proceed, pull the drain hose through the
opening under the sink. Stop pushing when the
dishwasher extends about 6 inches forward of
adjacent cabinets.
• Make sure drain hose is not kinked under or behind
the dishwasher.
• Make certain the house wiring, drain line and
water line do not interfere with components under
dishwasher.
STEP 9
Do not push against
front door panel with
knee. Damage to the
door panel will occur.
8
STEP 10
Top View
Trim
Strip
Trim
Strip
Fully seat to tub flange