Brochure

Laser Centering Device

for ERESCO MF3/4

The alignment of the workpiece to

be inspected with the central beam

of the X-ray tube and vice versa

can be greatly simplied through

Application

the usage of a mini laser instead

of a centering rod. For this purpose

the laser is swivelled in front of the

X-ray tube window and activated

by the toggle switch. Prior to the

exposure the laser must be turned

o and swivelled out of the X-ray

beam.

• The mini laser battery has a very long life due to the energy-saving pulsed operation.

• This laser complies with laser class II as per DIN EN 60825 (VDE 0837).

WARNING: Do not stare into laser beam !

Sensing & Inspection Technologies

PAGE 1
GE Sensing & Inspection Technologies Laser Centering Device for ERESCO MF3/4 Application The alignment of the workpiece to be inspected with the central beam of the X-ray tube and vice versa can be greatly simplified through the usage of a mini laser instead of a centering rod. For this purpose the laser is swivelled in front of the X-ray tube window and activated by the toggle switch. Prior to the exposure the laser must be turned off and swivelled out of the X-ray beam.
PAGE 2
Technical Data Laser type Visual laser diode Output power <= 1 mW Wave length 670 nm Beam color red Beam operating distance > 20 m Battery 2 x 1.5 V AAA-size-alkali or equivalent Battery life time approx. 16 hours continuous operation Height 33 mm Width 18 mm Length 120 mm Changing the batteries • To insert new batteries remove the screw cap. • Remove the batteries, they should be placed in a recycling container.