Logging Services Capabilities Overview GE Oil & Gas
4 6 9 EHS Initiatives Wireline Services Cased Hole Logging Services 10 Cased Hole Logging Services 11 Depth Control/Correlation 13 Formation Evaluation 14 Cement Bond Evaluation 15 Production Evaluation 17 Casing and Borehole Integrity 19 Pipe Recovery 23 Perforating 26 Mechanical Services As a leading innovator in oilfield technologies, GE Oil & Gas not only designs, develops, and engineers high quality performance tools for the oil and gas industry, but we also provide a full range of loggin
GE Oil & Gas Training Center Weimar, TX Gun Loading Facility Corpus Christi, TX GEOG Log Analysis Center (LAC) Houston, TX EHS Initiatives GE Oil & Gas has recognized the immediate need for a dedicated Training Center staffed by highly trained instructors with decades of experience to train tomorrow’s leaders in the oil and gas industry.
Wireline Services Conventional Slickline Services Our conventional slickline services teams can deploy 7/32 in, 1/4 in, and 5/16 in Dyform® cables, as well as carbon plow steel and alloy slickline wires. We offer a wide range of services, including sleeve shifting, swabbing, paraffin scraping, and bailing.
The Production Logging Suite gathers all the data needed to analyze downhole fluid conditions and movement in vertical or horizontal wells as to three-phase oil, gas, and water entry points and contribution to total production flow. It is available in 1 3/8” O.D. in standard or H2S environments.
CASED HOLE LOGGING SERVICES DEPTH CONTROL/CORRELATION GE Oil & Gas offers a full range of casedhole well logging services to support your drilling, completion, production and abandonment operations. Other features include: With operations centers throughout Texas and Louisiana, our specialists are strategically located to provide you with the level of services you need—whether offshore or onshore. Redundancy Offshore Shelf E-Line Skids • 20,000-lbs (137.
FORMATION EVALUATION DEPTH CONTROL/CORRELATION Gamma Gun/CCL Log (GG/CCL) When the gamma-ray tool is combined with setting tool devices or perforating guns, it is referred to as a gamma gun. The Gamma Gun/CCL Log provides depth correlation when running perforating guns, plugs, packers and other downhole devices and can be enabled to pass either positive (+) or negative (-) voltage and current to an electric detonator which initiates the explosive device.
CEMENT BOND EVALUATION PRODUCTION EVALUATION Cement Bond Log (CBL) Radial Bond Log (RBT) Our standard offering is a Cement Bond Log with Gamma Ray/CCL, which utilizes an omnidirectional 3-ft receiver that indicates the attenuation of the cement bond to the casing, in addition to the 5-ft receiver that displays a VDL presentation of the cement bond to the casing, cement, and formation.
PRODUCTION EVALUATION Tracer Log GE’s services specialists utilize this radioactive tracer log primarily for injection wells. It comprises a downhole tracer fluid injector, a collar locator, and two gammaray detectors. CASING AND BOREHOLE INTEGRITY Multi-Finger Caliper Log (MFC) GE Oil & Gas understands that our customers need immediate information regarding suspected tubing or casing issues.
CASING AND BOREHOLE INTEGRITY Extended-Reach Caliper Log Our services team uses an extendedreach caliper that is similar to the 60-arm multichannel caliper, but with a much larger measurement range up to 16 in. Data from each of the 60 arms is monitored and recorded independently. The tool 18 contains an inclinometer to denote the wellbore high side and well deviation. It is also capable of recording wellbore temperature simultaneously with the caliper measurements.
PIPE RECOVERY String Shot Back-Off The string shot back-off used by our services team employs a preciselycalculated quantity of explosive detonating cord (Primacord®) to produce a shock wave that will release a target pipe joint. Before detonation, left-hand torque is applied to the string at the neutral weight, with the pipe neither in tension nor in compression at the point of the shot. The shock wave causes the target joint to release.
PIPE RECOVERY PERFORATING Jet Cutters Chemical Cutter The jet cutters used by our services experts incorporate a circumferential jet charge that severs a broad range of downhole tubulars—from coiled tubing to casing. Since the jet charge sometimes leaves a flare on the severed pipe string, it is often necessary to smooth the top end of the fish with a mill.
PERFORATING Wireless Shot Detection System® Probe Technologies Tubing-Conveyed Perforating (TCP) The Wireless Shot Detection System (WSDS) enables the user to wirelessly monitor and record vibrations of the well induced by explosive charges detonating in a downhole environment. It allows the user to secure the transmitter at the wellhead with a magnetic base and monitor and record data simultaneously up to 400 feet away using intrinsically safe broadband wireless telemetry.
Mechanical Services GE offers a full range of casing, tubing, and thru-tubing mechanical services to support operations from drilling through recompletion and abandonment.
For further information on how we can provide a full range of services for your specific needs, please contact us at: GE Oil & Gas Logging Services Eline Offices Sline Offices International Locations Main Offices 19416 Park Row, Suite 100 Houston, TX 77084 800.905.4275 Administration and Sales 201 Commercial Parkway Broussard, LA 70518 800.545.5229 GE Oil & Gas Logging Services, C.A. Anaco, Venezuela 58-282-4242967 Sales Offices Houston, TX 800.905.4275 Operations Alice, TX 866.607.