Specification Sheet
P-16/2008
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Steel ROUND tAPeReD AReA lIGHtING POleS
10 tO 20 feet (3 tO 6 meteRS)
Anchor
Base
(Base
Type A)
Embed-
ded Base
(Base
Type E)
P16M, P17M
T10C
SEML, SEMT
Shaft Dimensions
Bottom OD X Top OD X
Length X Thickness
(in. X in. X ft-in. X gauge)
Maximum Recommended
Total Load
Approxi-
Nominal NOTE: With embedded mate
Mounting Weight 70 80 90 Ordering base, shaft length Weight Pole Base Data
Height (ft) (lbs) MPHI MPHI MPHI Number is 2 ft greater. (lbs) Item Number
POLES WITH ANCHOR BASE. SEE FIG. 1.
10 125 12.7 9.6 7.4 ARTS103S4.411APP 4.40 X 3.0 X 10-0 X 11 61 1
12 125 11.7 8.7 6.7 123S4.711APP 4.68 X 3.0 X 12-0 X 11 72 1
14 125 11.1 8.2 6.3 143S5.011APP 4.96 X 3.0 X 14-0 X 11 85 1
16 125 10.8 7.9 6.0 163S5.211APP 5.24 X 3.0 X 16-0 X 11 98 1
18 125 10.8 7.9 5.9 183S5.511APP 5.52 X 3.0 X 18-0 X 11 111 1
20 125 11.1 8.1 6.0 203S5.811APP 5.80 X 3.0 X 20-0 X 11 126 1
POLES WITH EMBEDDED BASE. SEE FIG. 2.
10 125 13.3 10.0 7.7 ARTS103S4.711EPP 4.68 X 3.0 X 12-0 X 11 59 –
12 125 12.4 9.3 7.2 123S5.011EPP 4.96 X 3.0 X 14-0 X 11 71 –
14 125 11.6 8.7 6.6 143S5.511EPP 5.24 X 3.0 X 16-0 X 11 84 –
16 125 10.9 8.1 6.1 163S5.511EPP 5.52 X 3.0 X 18-0 X 11 98 –
18 125 10.3 7.6 5.7 183S5.811EPP 5.80 X 3.0 X 20-0 X 11 112 –
20 125 9.0 7.1 5.3 203S6.111EPP 6.08 X 3.0 X 22-0 X 11 127 –
Eective Projected
Area (sq ft)
POLE SELECTION TABLE
Shipped with pole: anchor bolts, decorative chrome cap nuts, hardware, and anchor bolt circle template.
SPECIFICATION FEATURES
• Round tapered steel shaft
• Prime painted or galvanized finish
• Shaft lengths from 10 to 20 feet
• Three inch OD top for mounting single
luminaire
• Choice of anchor or embedded base
SUGGESTED LUMINAIRE APPLICATIONS
REFERENCES
See Page P-21 for Pole Base Data
See Page P-2 for Pole Selection Guidelines
ORDERING NUMBER LOGIC (See Pole Selection Table for actual Ordering Numbers)
A
PRODUCT IDENT
(LUMINAIRE
USAGE)
X
T
SHAFT
SHAPE
X
S
POLE
MATERIAL
X
10
NOMINAL
MOUNTING
HEIGHT (FT)
XX
4.4
SHAFT DIMENSIONS
BOTTOM SHAFT
OD (IN.)
XXX
A
BASE TYPE
X
PP
FINISH
XX
A = Area T = Tapered S = Steel 10 = 10
12 = 12
14 = 14
16 = 16
18 = 18
20 = 20
4.4 = 4.4
4.7 = 4.7
5.2 = 5.2
5.5 = 5.5
5.8 = 5.8
6.0 = 6.0
6.4 = 6.4
A = Anchor
(See illustration above)
E = Embedded
(See illustration above)
GV = Galvanized
PP = Prime Painted
(Standard)
NOTE: If galvanized
nish is required,
substitute GV for PP in
ordering number listed
in Pole Selection Table.
R
POLE
CROSS
SECTION
X
R = Round
3S
MOUNTING
XX
3S = 3-in. OD top
for single
luminaire
11
GUAGE
XX
11 = 11
For more Decorative Pole selections,
go to www.gelightingsolutions.com
StreetDreams™ Brochure OLP-2770C.