Use and Care Guide

4 49-5000090
USING THE AIR CONDITIONER
Controls
Features and appearance will vary.
Lights below the touch pads on the air conditioner control panel indicate the selected settings.
Air Conditioner Controls
Remote Control
Note: The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to degree Celcius (°C),
press the Temp Increase + and Temp Decrease - buttons together and hold for 3 seconds. Repeat the process to change back to
degree Fahrenheit (°F)
Power Pad
Turns air conditioner on and off. When turned on, the
display will show the room temperature.
Display
Shows the room temperature or time remaining on the
Delay timer. Shows the Set temperature while setting
the temperature in Heat, Cool or ECO modes.
Temp Increase + /Decrease – Pads
8VHWRVHWWHPSHUDWXUHZKHQLQHeat, Cool or ECO
mode. The Set light will turn on while setting.
Delay Increase + /Decrease – Pads
Each touch of the Increase + / Decrease - pads on
the unit or the Increase + / Decrease – pads on the
remote control will set the delay time when using the
Delay 1–24hr timer. The Set light will turn on while
setting.
Fan Speed Pads
8VHWRVHWWKHIDQVSHHGWRLow, Med, High
or Auto on the unit. NOTE: On the remote control,
use the fan speed Increase + / Decrease – pads to
set the fan speeds to Low, Med or High8VHWKH
Auto pad to turn Auto fan on.
Mode Pad
8VHWRVHWWKHDLUFRQGLWLRQHUWRHeat, Cool, ECO or
Fan Only mode.
WiFI
Enables connection of the air conditioner to the home
WiFi. Download App for details at GEAppliances.com/
connect.
Filter Reset Pad
LED will turn on when fan has accumulated 250 hours
of run time as a reminder to clean filter. Press Reset
Filter to turn off the LED and reset the accumulated
run time.
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
Fan Fan
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease
Auto Fan on
Fan speed
Increase
8QLWSRZHU
on/off
Auto
High
Med
Low
Cool
Fan
Eco
Reset
Filter
Fan Mode
Power
WiFi
8
Light indicates
WiFi connection
Light indicates the unit is in
the temperature set mode.