Instructions / Assembly

LED Color Effects 1L Bethlehem Star Tree Top
IMPORTANT SAFETY INSTRUCTIONS
When using electric products, basic precautions should always be followed including the following:
READ & FOLLOW ALL SAFETY INSTRUCTIONS
1. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played with or placed where small
children can reach it.
2. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the
product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
3. Do not use this product for other than its intended use.
4. This seasonal use product is not intended for permanent use or installation.
5. Unplug when leaving the house, when retiring for the night, or if left unattended.
6. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
7. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
8. Do not hang ornaments or other objects from cord, wire, or light string.
9. Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while the power is on.
10. Do not perform any maintenance or troubleshoot for bad or broken lamps while the power is on.
11.Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
12. Do not cover the product with cloth, paper or any material not part of the product when in use.
13. Do not let lamps rest on the supply cord or on any wire.
14. Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or
enclosures, loose connections, or exposed copper wire.
2. Before storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the
product conductors, connections, and wires.
3. When not in use, store neatly in a cool, dry location protected from sunlight.
4. When the product is used on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily.
Keep the tree holder filled with water.
5. lf the product is placed on a tree, the tree should be well secured and stable.
NOTE: Use only this GE branded, Class 2 Power Supply, Model SA9A-05-05, manufactured by TDC that was provided
with this product. DO NOT use this adapter with any other product.
NOTE: LEDs in this set are non-replaceable. Tampering with this set will void the warranty.
Battery system (lithium) Nominal Voltage: 3V ×1 Batteries included
WARNING: DO NOT expose batteries to fire, attempt to recharge, use different sizes or install backwards. Do not insert incorrectly. DO NOT mix old and new
batteries. Exhausted batteries are to be removed from the product. DO NOT mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. The
battery cannot be ingested. Never handle damaged or leaking batteries – may result in burn injuries or cause serious internal injuries if swallowed. Obtain medical
attention immediately. Misuse can cause battery to overheat, rupture, leak or explode, resulting in personal injury and property damage. Do not use rechargeable
batteries. Remove batteries when not used for an extended period of time, or when depleted.
DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
KEEP AWAY FROM CHILDREN
Operating Instructions.
INSTALATION OF TREE TOP
● Secure the mounting clip to the stem on the bottom of the tree top housing and
then install tree top securely on a stable branch using the enclosed mounting clip.
● Connect attached adaptor to a 120v power supply.
-SEE OTHER SIDE-
-CONTINUED FROM OTHER SIDE-
USING THE REMOTE CONTROL FOR STEADY ILLUMINATION
● Press the “ON” button (1) to illuminate the tree top.
● Press buttons (5) to select desired color. You can increase or decrease the brightness of the color by pressing either (3) dimmer or (4) brighter.
USING THE REMOTE CONTROL FOR MULTI FUNCTION ILLUMINATION
● Press the “ON” button (1) to illuminate the tree top.
● Pressing the “FLASH” button (6) activates a continuous cycle of flashing and changing of solid colors.
● Pressing the “STROBE” button (7) activates a continuous cycle of strobing and changing of solid colors.
● Pressing the “FADE” button (8) activates a continuous cycle of fading in and out of solid colors.
● Pressing the “SMOOTH” button (9) activates a continuous cycle of changing solid colors.
● You can increase or decrease the speed of the cycle by pressing either (3) faster or (4) slower buttons.
CAUTION: 1. This lighting string is rated 5 Watts (1 Amps), do not overload.
2. To reduce the risk of fire electric shock: a) Do not install on trees having needles, leaves or branch coverings of metal or materials that look like metal, and
b)Do not mount or support strings in a manner that can cut or damage wire insulation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
⑴ this device may not cause harmful interference, and
⑵ this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
For questions and/or assistance, call customer service at 1-877-398-7337 or visit us on the web at www.GEholidaylighting.com
FOR INDOOR USE ONLY MADE IN CHINA
PRINTED IN CHINA E246482 HC-18
Nicolas Holiday Inc. 204 Spring Hill Road Trumbull, CT 06611
©2018 Nicolas Holiday Inc., 9F., No. 37, Guangfu N. Rd Taipei, Taiwan 10560. All rights reserved
MODEL NO. :
88995