45255 ver2 Wireless Color Digital Home Monitoring Kit User Manual HOME MONITORING SMALL BUSINESS PROTECTION BABY MONITORING NANNY CAM THEFT DETECTION & PREVENTION NIGHT VISION DOORWAY MONITORING (INDOORS) WAITING AREAS CAREGIVER ASSITANCE/ MONITORING PET SUPERVISION http://goo.gl/3wUHy NOTE: Camera and surveillance products may be prohibited by laws that vary under federal and state laws.
FEATURES INITIAL SETUP Camera ............................................................................................. 5 Monitor.............................................................................................. 5 THE BASICS How to view live video .............................................................. 6 How to view live video with motion and/or sound detection ........................................................... 6 FEATURES Night Light .....................................
Congratulations on your purchase of the GE Wireless Color Digital Home Monitoring Kit! Please review these instructions carefully and retain them for your future reference. FEATURES CAMERA • 2.
FEATURES speaker (audio from camera(s)) music controls/ lullabies MONITOR • High contrast 3.5” LCD color monitor for remote video and audio monitoring • 2.
INITIAL SETUP: CAMERA Wall mount NOTE: Before use, remove the plastic film protecting the night vision LEDs (around lens). Supply power to the camera using one of the following options: • AC Adapter1. Plug-in one of the two AC power adapters into an electrical outlet. 2. Insert the other end of the power adapter into the base of the camera. 3. Locate the power switch on the left side of the camera. 4. Slide the power switch to the ‘on’ position.
• AC Adapter into Cradle1. Plug-in the AC power adapter into an electrical outlet. Charging 2. Insert the other end of the AC power Light adapter into the rear of monitor AC power the charging cradle. 3. Place the monitor into the cradle, making sure the kickstand is secure 4. The charging light will illuminate near the power input on the monitor. RED=Charging NOTE: Depending on the current state of GREEN=Fully charged the battery, it can take up to 6 hours to fully charge the monitor.
TALK-BACK To be notified with the screen in standby mode... 1. Adjust/disable audio & motion sensitivity (refer to the ‘Settings’ section in the manual) 2. Press and release the ‘menu’ button on the monitor. Use the directional keypad to highlight ‘Alarm Volume’. Press and release the ‘ok’ button. 3. Adjust the volume using the ‘left’ and ‘right’ arrows on the directional keypad. Adjust to desired level. Press and release the ‘ok’ button to save. Press and release the ‘menu’ button to exit. 4.
3. Press and release the ‘ok’ button. Use the directional keypad to highlight either ‘1x’ or ‘2x’. 4. Press and release the ‘ok’ button. Press and release the ‘menu’ button to exit. Use the directional keypad to digitally pan and tilt the displayed image. TEMPERATURE ALERT Monitor the temperature near the camera with alarm notification. When activated, the temperature reading on the display will blink red continuously when the temperature range is exceeded.
ADJUSTING THE BRIGHTNESS 1. Press and release the ‘menu’ button on the monitor. Using the directional keypad, highlight the ‘Settings’ option. 2. Press and release the ‘ok’ button. Use the directional keypad to highlight ‘Brightness’. 4. Using the directional keypad, highlight the ‘Default’ option. 5. Press and release the ‘ok’ button. 6. Use the directional keypad to highlight either ‘Yes’ or ‘No’. 7. Press and release the ‘ok’ button. 8. Press and release the ‘menu’ button to exit. 3.
• Press and release the ‘quad/scan’ button until multiple camera video streams appear on the screen. QUAD VIEW 1 3 1 2 3 4 2 4 2. Sequential (Scan) • Displays each paired camera every 7-seconds. • Press and release the ‘quad/scan’ button until a single camera video stream appears. • View individual camera continuously. 3. Manual (Single Camera View) • Press and release the ‘manual’ button. Tap repeatedly to cycle through all cameras paired to monitor. ‘jump’ to the applicable camera.
Automatically Record with motion and/or sound detection Activates recording when motion and/or sound is detected by camera. • WITHOUT notification alarm ...To be notified with the screen illuminated Adjust/disable audio & motion sensitivity (refer to the ‘Settings’ section in the manual) 1. Press and release the ‘auto’ button on the right side of the monitor. A red light will illuminate near the top left of the display indicating automatic recording mode is active. 2.
4. Press and release the ‘auto’ button on the right side of the monitor. A red light will illuminate near the top left of the display indicating automatic recording mode is active. 5. In manual or scan mode, press and release the ‘stdby’ button. The screen will turn off. 6. When motion and/or sound is detected by camera, the screen will automatically turn back on and will begin recording. ‘REC’ will appear flashing on top of the display.
4. Use the directional keypad to select the file desired. Press and release the ‘ok’ button to select. The video selected will start playing immediately. The following commands can be use during playback: Stop, Fast Forward, Rewind and Play from Beginning. 5. Press and release the ‘menu’ button to exit. NOTE: To return to a previous list of folders viewed on the display, press and release the ‘OK’ button after highlighting this icon whenever shown. • Delete recorded videos 1.
5. Image on screen appears to illuminate or ‘pulse’ on and off repeatedly. The camera is likely pointed directly at a light source causing the camera sensor autofocus to not ‘lock-on’ to what is displayed on the screen. Try moving the camera slightly or moving the camera away from the light source (if known) to allow the camera to focus properly. 4. Press and release the ‘pair’ button, located on the bottom rear part of the camera head. The monitor will allow 30 seconds before timing out.
SPECIFICATIONS: GENERAL RF Frequency: .................................................................................2.4~2.48 GHz Transmit Power:........................................................................................... 16dBm RF Range: ................................................450ft Unobstructed Line of Sight Modulation: .........................................................................................................GFSK Spread Spectrum:................................
