Specification Sheet

ManualsBrandsGE ManualsDoor Window Sensors32563

32563 PRODUCT SPECIFICATIONS

Specications

Power: 1 x CR2 Battery

Signal Frequency: 908.4/916

Range: Up to 150 feet from controller or closest Z-Wave device

Operating Temperature: 32-104° F (0-40° C)

Warranty: 2-year limited product warranty

For indoor use only.

GE Z

Wave Hinge Pin

Smart Door Sensor

www.byjasco.com

Design Features

· Adjustable for left and right

opening doors

· Adjusts to t door trim to

avoid false triggering

· Fits up to 5/16” removable

hinge pin diameter

· Molded color scuff resistant

tip avoids wear marks on door

· Can be mounted to bottom

hinge for maximum

concealment

· Remote Monitoring

Monitor doors from a

distance with smartphones

or tablets

· Trigger Automations

Activate scenes or lights when

door is opened or closed

· Sends Alerts

Be notied when activity is

detected

· Color-Matching Kits Available

Paintable/Silver/Dark Brown

· OTA (Over-the-Air)

Updateable Utilizes the

Z-Wave Firmware Update

Meta Data command class

for standardized wireless

rmware updates

· Visit http://www.ezzwave.com/

hubs/ for hub compatibility

· Trilingual Instruction manual –

(English, French, Spanish)

Z-Wave Plus Features

· Works with Z-Wave Classic

and Z-Wave Plus Products

· 50% more wireless range

· 250% faster processor

· 400% more memory

· 50% more energy efcient

· Supports wireless upgrades

to future-proof your home

* Requires Z-Wave hub or controller,

functions may vary depending on brand.

Summary of content (2 pages)

PAGE 1
32563 PRODUCT SPECIFICATIONS GE Z-Wave Hinge Pin Smart Door Sensor Specifications Power: 1 x CR2 Battery Signal Frequency: 908.4/916 Range: Up to 150 feet from controller or closest Z-Wave device Operating Temperature: 32-104° F (0-40° C) Warranty: 2-year limited product warranty For indoor use only.
PAGE 2
32563 PRODUCT SPECIFICATIONS Device Configuration Adding your device to a Z-Wave network Once the hub is ready to add your smart door sensor, press and release button on the smart door sensor to add it in the network. Adjusts for door trim Reversible for right and left door openings Program button CR2 battery included (reverse) To remove and reset the device Once the controller is ready to remove your device, press and release the button on the smart door sensor to remove it from the network.