User's Manual

84 MDS Master Station MDS 05-6399A01, Rev. D
Internal Duplexer Cabling: A number of different duplexers can be installed in the radio. While the
physical appearance of the duplexer may vary slightly, its operation and removal remain the same.
2. Disconnect the SMA cables from the front of the duplexer tray
2. Remove the two screws on the top of the unit that secure the duplexer tray into the front of the chassis.
3. Carefully slide the duplexer tray out the front of the chassis by applying pressure to the antenna
N-connectors on the rear of the unit.