User's Manual
124 Mercury Reference Manual 05-4446A01, Rev. C
Invisible place holder
Figure 3-96. Reset to Factory Defaults Action
(Note challenge question at bottom of screen)
3.12.1Auto Firmware Upgrade Menu (AP Only)
Invisible place holder
Figure 3-97.Auto Firmware Upgrade Menu
¥ Firmware UpgradeCauses all of the Remotes associated to this
AP to read the APs specified (by
Firmware for Upgrade) firmware
version (active or inactive), and download it via TFTP to the
inactive image if the Remote does not already have that firm-
ware version.
¥
Firmware AutobootBoot connected remotes to Firmware for
Upgrade
(see below).
¥ Reboot RemotesDetermines how a Remote behaves once it has
downloaded new firmware from the AP as part of an
auto-upgrade. When enabled, the Remotes reboot to the new
firmware.