User's Manual

TRAIN CHIEF® II LRCS w/Lightweight OCU OWNER’S MANUAL
95-00-0-xxx Rev 000 9-1 Control Chief Corporation
9 DETAILED MAINTENANCE PROCEDURE
Locomotive Antenna System
To insure optimum system performance the locomotive antenna system should be inspected on
a daily basis. This inspection would simply consist of a visual inspection of the antenna and the
external cable. The visual inspection of the antenna would be to check the antenna is in place
and not damaged. (The antenna should not be deformed.) A quick visual inspection of the
external cable should be done to insure the cable is not damaged.
Pneumatic Filter Service Instructions
For best system performance replace the particulate and coalescing filter elements after a
pressure drop of 10-psi has been reached or after one year of service or less depending upon
your operating environment.
Periodically check the bowl drains to monitor the level of water and containments in the filter,. If
water is observed it is an indication the filter needs servicing. Order filter replacement kits from
Control Chief Customer Service department.
Figure 9-1
Pneumatic Filter Replacement Parts
Filter Type Part Number Description
PARTILCULATE 50-20-0-011 Replacement kit for Particulate Filter Element
COALESCING 50-20-0-010 Replacement kit for Coalescing Filter Element
Particulate filter: 5 micron element used as a primary filter to remove water, dust, and debris for
the air line. Water removal efficiency at 90% or better at rated flow.
Coalescing filter:
Used as a secondary filter to remove up to 99.99% of oil and particles.