Dishwasher Specifications

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
GDT665SBN/SFN/SGN/SMN/SSN
GE
®
Stainless Steel Interior Dishwasher with Hidden Controls
Specification Revised 6/20
As an ENERGY STAR
®
partner, GE has determined
that this product meets the
ENERGY STAR guidelines
for energy efficiency.
Certified to NSF
Standard 184 for
sanitization
CERTIFIED
SAFETY US CA
SANITATION US
Listed by
Underwriters
Laboratories
For answers to your GE Profile
™
or GE appliances product questions, visit our
website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
ELECTRICAL RATING
Voltage AC................................................................120
Hertz..........................................................................60
Total connected load amperage................................6.6
Calrod
®
heater watts max................................800/500
For use on adequately wired 120-volt, 6.6-amp circuit
having 2-wire service with a separate ground wire.
This appliance must be grounded for safe operation.
INSTALLATION INFORMATION: Before installing,
consult installation instructions packed with product
for current dimensional data.
This Wall Area
must be Free
of Pipes or
wires
33-1/2" to 34-3/4"
Underside of
Countertop
to Floor
Figure A
Cabinets
Square
and
Plumb
24"
Min.
4"
6"
Plumbing and Electric Service
Must Enter Inside This Area
24"
Min.
24"
Typical
33-3/8" MIN.
adj to
34-5/8" MAX.
23-3/4"
29-7/8"
27-1/2"
4" (toekick)
Overall depth including
handle: 25.6"